Deutz-Fahr AgroXtra 3.57 or International Harvester 585?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the AgroXtra 3.57 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 585 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Deutz-Fahr AgroXtra 3.57 suits loader and hydraulic implement work better on this data: 20% (405 kg / 893 lb) more three-point lift.
  • The Deutz-Fahr AgroXtra 3.57 suits road haulage better on this data: 20% (5.0 km/h / 3.1 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Deutz-Fahr AgroXtra 3.57 and International Harvester 585, with the call on each
QuestionAgroXtra 3.57585Call
Which puts more power through the PTO shaft?43.9 kW (58.9 hp)Traktorenlexikon, “Deutz-Fahr AgroXtra 3.57”43.4 kW (58.2 hp)Traktorenlexikon, “IHC 585 (XL)”Not comparableNot comparable on power at the PTO shaft: the AgroXtra 3.57 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 585 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the AgroXtra 3.57 and the 585.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the AgroXtra 3.57 and the 585.
Which pumps more oil for implements?38.0 L/min (10.0 gpm)Traktorenlexikon, “Deutz-Fahr AgroXtra 3.57”—No figureNo call on hydraulic flow: no figure on record for the 585.
Which lifts more on the three-point hitch?2,400 kg (5,291 lb)Traktorenlexikon, “Deutz-Fahr AgroXtra 3.57”1,995 kg (4,398 lb)Traktorenlexikon, “IHC 585 (XL)”AheadThe Deutz-Fahr AgroXtra 3.57 has 20% more lift (405 kg / 893 lb) than the International Harvester 585 (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?3,290 kg (7,253 lb)Traktorenlexikon, “Deutz-Fahr AgroXtra 3.57”2,900 kg (6,393 lb)Traktorenlexikon, “IHC 585 (XL)”Ahead (a fact, not an advantage)The Deutz-Fahr AgroXtra 3.57 is 13% heavier (390 kg / 860 lb) than the International Harvester 585 (both unladen weight, as stated by the source).
Which may carry more ballast and load?4,500 kg (9,921 lb)Traktorenlexikon, “Deutz-Fahr AgroXtra 3.57”—No figureNo call on maximum permissible mass: no figure on record for the 585.
Which has the wider choice of gears?16Traktorenlexikon, “Deutz-Fahr AgroXtra 3.57”8 to 16Traktorenlexikon, “IHC 585 (XL)”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the AgroXtra 3.57 and the 585.
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Deutz-Fahr AgroXtra 3.57”25 km/h (15.5 mph)Traktorenlexikon, “IHC 585 (XL)”AheadThe Deutz-Fahr AgroXtra 3.57 has 20% more top speed (5.0 km/h / 3.1 mph) than the International Harvester 585 (both top speed forward, as stated by the source).
Which offers more PTO speeds?540/1000/750 rpmTraktorenlexikon, “Deutz-Fahr AgroXtra 3.57”540/1000 rpmTraktorenlexikon, “IHC 585 (XL)”AheadThe Deutz-Fahr AgroXtra 3.57 offers 750 rpm at the PTO, which the International Harvester 585 does not (as stated by the sources).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Deutz-Fahr AgroXtra 3.57”—No figureNo call on PTO independence: not stated for the 585.
Which drives on both axles?4WDTraktorenlexikon, “Deutz-Fahr AgroXtra 3.57”Two-wheel or four-wheel driveTraktorenlexikon, “IHC 585 (XL)”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1991–19961981–1990Ahead (a fact, not an advantage)The Deutz-Fahr AgroXtra 3.57 is newer: production began 10 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Deutz-Fahr AgroXtra 3.57 has 20% more lift (405 kg / 893 lb) than the International Harvester 585 (both lift at the hitch ends, as stated by the source).
  • The Deutz-Fahr AgroXtra 3.57 is 13% heavier (390 kg / 860 lb) than the International Harvester 585 (both unladen weight, as stated by the source).
  • The Deutz-Fahr AgroXtra 3.57 has 20% more top speed (5.0 km/h / 3.1 mph) than the International Harvester 585 (both top speed forward, as stated by the source).
  • The Deutz-Fahr AgroXtra 3.57 offers 750 rpm at the PTO, which the International Harvester 585 does not (as stated by the sources).
  • The Deutz-Fahr AgroXtra 3.57 is newer: production began 10 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the AgroXtra 3.57 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 585 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources