Deutz-Fahr Agrotron M 420 or Deutz-Fahr Agrotron TTV 620?

Which should you choose?

On performance, no comparable figure differs by more than its threshold: on this data the machines are level.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “similar machines”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Deutz-Fahr Agrotron M 420 and Deutz-Fahr Agrotron TTV 620, with the call on each
QuestionAgrotron M 420Agrotron TTV 620Call
Which puts more power through the PTO shaft?95.9 kW (128.6 hp)Traktorenlexikon, “Deutz-Fahr Agrotron M 420”100.0 kW (134 hp)Traktorenlexikon, “Deutz-Fahr Agrotron TTV 620”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the Agrotron M 420 and the Agrotron TTV 620.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the Agrotron M 420 and the Agrotron TTV 620.
Which pumps more oil for implements?—121.5 L/min (32.1 gpm)Traktorenlexikon, “Deutz-Fahr Agrotron TTV 620”No figureNo call on hydraulic flow: no figure on record for the Agrotron M 420.
Which lifts more on the three-point hitch?9,200 kg (20,283 lb)Traktorenlexikon, “Deutz-Fahr Agrotron M 420”—No figureNo call on three-point lift: no figure on record for the Agrotron TTV 620.
Which is heavier, for traction?5,435 kg (11,982 lb)Traktorenlexikon, “Deutz-Fahr Agrotron M 420”6,525 kg (14,385 lb)Traktorenlexikon, “Deutz-Fahr Agrotron TTV 620”Ahead (a fact, not an advantage)The Deutz-Fahr Agrotron TTV 620 is 20% heavier (1,090 kg / 2,403 lb) than the Deutz-Fahr Agrotron M 420 (both unladen weight, as stated by the source).
Which may carry more ballast and load?9,000 kg (19,842 lb)Traktorenlexikon, “Deutz-Fahr Agrotron M 420”—No figureNo call on maximum permissible mass: no figure on record for the Agrotron TTV 620.
Which has the wider choice of gears?—Stepless (CVT)Traktorenlexikon, “Deutz-Fahr Agrotron TTV 620”DifferTransmissions differ in kind: the Deutz-Fahr Agrotron M 420 has no transmission type stated and the Deutz-Fahr Agrotron TTV 620 is stepless (CVT) — not called.
Which offers a creeper range?YesTraktorenlexikon, “Deutz-Fahr Agrotron M 420”—No figureNo call on a creeper range: not stated for the Agrotron TTV 620.
Which is faster on the road?—40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “Deutz-Fahr Agrotron TTV 620”No figureNo call on top speed: no figure on record for the Agrotron M 420.
Which offers more PTO speeds?540/1000/540E/1000E rpmTraktorenlexikon, “Deutz-Fahr Agrotron M 420”540/1000/540E/1000E rpmTraktorenlexikon, “Deutz-Fahr Agrotron TTV 620”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?——No figureNo call on PTO independence: not stated for the Agrotron M 420 and the Agrotron TTV 620.
Which drives on both axles?4WDTraktorenlexikon, “Deutz-Fahr Agrotron M 420”4WDTraktorenlexikon, “Deutz-Fahr Agrotron TTV 620”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?2010–2007–2012EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Deutz-Fahr Agrotron TTV 620 is 20% heavier (1,090 kg / 2,403 lb) than the Deutz-Fahr Agrotron M 420 (both unladen weight, as stated by the source).
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Transmissions differ in kind: the Deutz-Fahr Agrotron M 420 has no transmission type stated and the Deutz-Fahr Agrotron TTV 620 is stepless (CVT) — not called.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, three-point lift, maximum permissible mass, a creeper range, top speed and PTO independence.

← Every figure for both machines, side by side, with sources