12 material differences
Tractor oneDeutz-Fahr Agrotron 80 MK32001–2003No measured PTO figureTractor twoNew Holland TN 75 DA/SA2003–2008No measured PTO figure
Which should you choose?
Read our verdict on the Agrotron 80 MK3 and the TN 75 DA/SA → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
12 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | Agrotron 80 MK3 | TN 75 DA/SA | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 74.0 hp | 75.0 hp | — |
| Engine declared | Deutz BF 4 M 1012 E | IVECO 8035.25 | differs |
| Displacement declared | 3.19 L | 2.93 L | +9% Agrotron 80 MK3 |
| Maximum torque declared | 218 lb·ft · 296 N·m | 203 lb·ft · 275 N·m | +8% Agrotron 80 MK3 |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6–24.9 mph · 30–40 km/h | — |
| Clutch declared | Hydraulically operated wet ZF multi-plate clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 21.9 gpm · 83.0 L/min | 15.6 gpm · 58.9 L/min | +41% Agrotron 80 MK3 |
| Pressure declared | — | 3,263 psi · 225 bar | — |
| Three-point lift, at the coupling points declared | 13,713 lb · 6,220 kg | 5,351 lb · 2,427 kg | +156% Agrotron 80 MK3 |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540/540E/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 8,752 lb · 3,970 kg | 5,214 lb · 2,365 kg | +68% Agrotron 80 MK3 |
| Maximum permissible mass declared | 14,330 lb · 6,500 kg | — | — |
| Wheelbase declared | 95.2 in · 2,419 mm | 81.5 in · 2,070 mm | +17% Agrotron 80 MK3 |
| Length declared | 157.7 in · 4,005 mm | 141.8 in · 3,601 mm | +11% Agrotron 80 MK3 |
| Width declared | 81.1 in · 2,060 mm | 73.5–95.6 in · 1,867–2,428 mm | differs |
| Ground clearance declared | 18.7 in · 475 mm | 13.9 in · 353 mm | +35% Agrotron 80 MK3 |
| Fuel tank declared | 190.2 qt · 180 L | 56.0 qt · 53.0 L | +240% Agrotron 80 MK3 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz-Fahr Agrotron 80 MK3 sources
- Source: Traktorenlexikon, “Deutz-Fahr Agrotron 80 MK3”
- Source: Traktorenlexikon, “Fendt Farmer 307 C”
New Holland TN 75 DA/SA sources
- Source: Traktorenlexikon, “New Holland TN75 DA/SA”
- Source: Traktorenlexikon, “Steyr 375 Kompakt”