Deutz-Fahr Agrotron 100 vs Deutz-Fahr DX 6.10
10 material differences · fewer than 12
Which should you choose?
Read our verdict on the Agrotron 100 and the DX 6.10 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | Agrotron 100 | DX 6.10 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 93.7 hp | 98.2 hp | — |
| Engine declared | Deutz BF4M 1012 EC | KHD F6L 912.74 | differs |
| Displacement declared | 3.19 L | 5.65 L | +77% DX 6.10 |
| Maximum torque declared | 263 lb·ft · 356 N·m | 263 lb·ft · 356 N·m | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6–24.9 mph · 30–40 km/h | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 17.0 gpm · 64.5 L/min | 14.7 gpm · 55.6 L/min | +16% Agrotron 100 |
| Three-point lift at ends declared | 13,713 lb · 6,220 kg | 11,464 lb · 5,200 kg | +20% Agrotron 100 |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 9,304 lb · 4,220 kg | 10,472 lb · 4,750 kg | +13% DX 6.10 |
| Maximum permissible mass declared | 16,535 lb · 7,500 kg | 14,991 lb · 6,800 kg | +10% Agrotron 100 |
| Wheelbase declared | 95.2 in · 2,419 mm | 106.4 in · 2,703 mm | +12% DX 6.10 |
| Length declared | 157.7 in · 4,005 mm | 179.1 in · 4,550 mm | +14% DX 6.10 |
| Width declared | 81.1 in · 2,060 mm | 90.7 in · 2,304 mm | +12% DX 6.10 |
| Height declared | 108.9 in · 2,765 mm | 111.0 in · 2,820 mm | — |
| Ground clearance declared | 19.1 in · 485 mm | 20.1 in · 510 mm | — |
| Turning radius, braked declared | — | 15.9 ft · 4.86 m | — |
| Fuel tank declared | 190.2 qt · 180 L | 126.8 qt · 120 L | +50% Agrotron 100 |
Deutz-Fahr Agrotron 100 sources
Source
- Source: Traktorenlexikon, “Deutz-Fahr Agrotron 100”
Deutz-Fahr DX 6.10 sources
Source
- Source: Traktorenlexikon, “Deutz-Fahr DX 6.10”