Deutz-Fahr Agrotron 100 or Deutz-Fahr DX 6.10?

Which should you choose?

On performance, every comparable figure that differs favours the Deutz-Fahr Agrotron 100: hydraulic flow, three-point lift and maximum permissible mass.

  • The Deutz-Fahr Agrotron 100 suits loader and hydraulic implement work better on this data: 16% (8.9 L/min / 2.4 gpm) more hydraulic flow and 20% (1,020 kg / 2,249 lb) more three-point lift.
  • The Deutz-Fahr Agrotron 100 suits road haulage better on this data: 10% (700 kg / 1,543 lb) more maximum permissible mass.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Deutz-Fahr Agrotron 100 and Deutz-Fahr DX 6.10, with the call on each
QuestionAgrotron 100DX 6.10Call
Which puts more power through the PTO shaft?67.6 kW (90.6 hp)Traktorenlexikon, “Deutz-Fahr Agrotron 100”68.0 kW (91.2 hp)Traktorenlexikon, “Deutz-Fahr DX 6.10”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the Agrotron 100 and the DX 6.10.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the Agrotron 100 and the DX 6.10.
Which pumps more oil for implements?64.5 L/min (17.0 gpm)Traktorenlexikon, “Deutz-Fahr Agrotron 100”55.6 L/min (14.7 gpm)Traktorenlexikon, “Deutz-Fahr DX 6.10”AheadThe Deutz-Fahr Agrotron 100 has 16% more hydraulic flow (8.9 L/min / 2.4 gpm) than the Deutz-Fahr DX 6.10 (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?6,220 kg (13,713 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 100”5,200 kg (11,464 lb)Traktorenlexikon, “Deutz-Fahr DX 6.10”AheadThe Deutz-Fahr Agrotron 100 has 20% more lift (1,020 kg / 2,249 lb) than the Deutz-Fahr DX 6.10 (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?4,220 kg (9,304 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 100”4,750 kg (10,472 lb)Traktorenlexikon, “Deutz-Fahr DX 6.10”Ahead (a fact, not an advantage)The Deutz-Fahr DX 6.10 is 13% heavier (530 kg / 1,168 lb) than the Deutz-Fahr Agrotron 100 (both unladen weight, as stated by the source).
Which may carry more ballast and load?7,500 kg (16,535 lb)Traktorenlexikon, “Deutz-Fahr Agrotron 100”6,800 kg (14,991 lb)Traktorenlexikon, “Deutz-Fahr DX 6.10”AheadThe Deutz-Fahr Agrotron 100 has 10% higher maximum permissible mass (700 kg / 1,543 lb) than the Deutz-Fahr DX 6.10 (both maximum permissible mass, as stated by the source).
Which has the wider choice of gears?21 to 24Traktorenlexikon, “Deutz-Fahr Agrotron 100”15 to 18Traktorenlexikon, “Deutz-Fahr DX 6.10”EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the Agrotron 100 and the DX 6.10.
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Deutz-Fahr Agrotron 100”30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Deutz-Fahr DX 6.10”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Deutz-Fahr Agrotron 100”540/1000 rpmTraktorenlexikon, “Deutz-Fahr DX 6.10”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Deutz-Fahr DX 6.10”No figureNo call on PTO independence: not stated for the Agrotron 100.
Which drives on both axles?4WDTraktorenlexikon, “Deutz-Fahr Agrotron 100”Two-wheel or four-wheel driveTraktorenlexikon, “Deutz-Fahr DX 6.10”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1997–20011983–1990Ahead (a fact, not an advantage)The Deutz-Fahr Agrotron 100 is newer: production began 14 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Deutz-Fahr Agrotron 100 has 16% more hydraulic flow (8.9 L/min / 2.4 gpm) than the Deutz-Fahr DX 6.10 (both pump flow, as stated by the source).
  • The Deutz-Fahr Agrotron 100 has 20% more lift (1,020 kg / 2,249 lb) than the Deutz-Fahr DX 6.10 (both lift at the hitch ends, as stated by the source).
  • The Deutz-Fahr DX 6.10 is 13% heavier (530 kg / 1,168 lb) than the Deutz-Fahr Agrotron 100 (both unladen weight, as stated by the source).
  • The Deutz-Fahr Agrotron 100 has 10% higher maximum permissible mass (700 kg / 1,543 lb) than the Deutz-Fahr DX 6.10 (both maximum permissible mass, as stated by the source).
  • The Deutz-Fahr Agrotron 100 is newer: production began 14 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources