11 material differences · fewer than 12
Tractor oneDeutz-Fahr AgroStar 6.281993–1995No measured PTO figureTractor twoNew Holland 82601996–1999No measured PTO figure
Which should you choose?
Read our verdict on the AgroStar 6.28 and the 8260 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | AgroStar 6.28 | 8260 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 113.5 hp | 113.5 hp | — |
| Engine declared | KHD F6L 913 | NEW HOLLAND 675-TD | differs |
| Displacement declared | 6.13 L | 7.48 L | +22% 8260 |
| Maximum torque declared | 257 lb·ft · 348 N·m | 330 lb·ft · 447 N·m | +28% 8260 |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6–24.9 mph · 30–40 km/h | — |
| Clutch declared | dry single clutch | Electro-hydraulically operated, oil-immersed multi-plate driving clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 14.5 gpm · 55.0 L/min | 24.6 gpm · 93.3 L/min | +70% 8260 |
| Pressure declared | — | 2,799 psi · 193 bar | — |
| Three-point lift, at the coupling points declared | 14,330 lb · 6,500 kg | 12,655 lb · 5,740 kg | +13% AgroStar 6.28 |
| Rear PTO speeds declared | 540/1000/750 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 10,229 lb · 4,640 kg | 11,662 lb · 5,290 kg | +14% 8260 |
| Maximum permissible mass declared | 18,739 lb · 8,500 kg | 17,637 lb · 8,000 kg | +6% AgroStar 6.28 |
| Wheelbase declared | 107.0 in · 2,718 mm | 107.2 in · 2,723 mm | — |
| Length declared | 179.4 in · 4,556 mm | 179.5 in · 4,560 mm | — |
| Width declared | 97.2 in · 2,470 mm | 92.5 in · 2,350 mm | — |
| Ground clearance declared | 20.9 in · 530 mm | 14.2 in · 360 mm | +47% AgroStar 6.28 |
| Fuel tank declared | 179.6 qt · 170 L | 232.5 qt · 220.0 L | +29% 8260 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz-Fahr AgroStar 6.28 sources
- Source: Traktorenlexikon, “Deutz-Fahr AgroStar 6.28”
- Source: Traktorenlexikon, “Deutz-Fahr DX 120”
New Holland 8260 sources
- Source: Traktorenlexikon, “New Holland 8260”