Deutz-Fahr DX 4.61 vs SAME Explorer 90 II (DT)

10 material differences · fewer than 12

Tractor one

1990–1993

No measured PTO figure

Tractor two

1989–1998

No measured PTO figure

Which should you choose?

Read our verdict on the DX 4.61 and the Explorer 90 II (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 4 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 4.61 and SAME Explorer 90 II (DT), field by field
Field	DX 4.61	Explorer 90 II (DT)	Gap
Engine
Engine power, claimed claimed	87 hp	86.8 hp	—
Engine declared	KHD BF4L 913	SAME 1000.4 A Turbo	differs
Displacement declared	4.09 L	4.00 L	—
Maximum torque declared	251 lb·ft · 340 N·m	232 lb·ft · 315 N·m	+8% DX 4.61
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	dry single clutch	Pedal-operated dry SAME single-disc clutch	differs
Hydraulics & hitch
Hydraulic control declared	—	Load sensing	—
Pump flow declared	—	9.5 gpm · 35.8 L/min	—
Pressure declared	—	2,654 psi · 183 bar	—
Three-point lift at ends declared	8,378 lb · 3,800 kg	—	—
Rear PTO speeds declared	540/1000/750 rpm	540/540E/1000E/1000 rpm	differs
Weight & dimensions
Unladen weight declared	9,149 lb · 4,150 kg	6,856 lb · 3,110 kg	+33% DX 4.61
Maximum permissible mass declared	16,535 lb · 7,500 kg	—	—
Wheelbase declared	96.5 in · 2,450 mm	95.1 in · 2,415 mm	—
Length declared	168.2 in · 4,272 mm	144.5 in · 3,670 mm	+16% DX 4.61
Width declared	90.2 in · 2,290 mm	81.5 in · 2,070 mm	+11% DX 4.61
Height declared	108.7 in · 2,762 mm	102.2 in · 2,595 mm	+6% DX 4.61
Ground clearance declared	18.3 in · 465 mm	20.5 in · 520 mm	+12% Explorer 90 II (DT)
Turning radius, braked declared	—	9.6 ft · 2.94 m	—
Fuel tank declared	139.5 qt · 132 L	116.2 qt · 110.0 L	+20% DX 4.61

Source

Source