Deutz-Fahr AgroPrima 6.16 vs Deutz-Fahr DX 6.30

6 material differences · fewer than 12

Tractor one

1992–1995

No measured PTO figure

Tractor two

1983–1990

No measured PTO figure

Which should you choose?

Read our verdict on the AgroPrima 6.16 and the DX 6.30 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

6 material differences · 7 fields identical or within 5%, which is not counted as material

Deutz-Fahr AgroPrima 6.16 and Deutz-Fahr DX 6.30, field by field
Field	AgroPrima 6.16	DX 6.30	Gap
Engine
Engine power, claimed claimed	109 hp	113.7 hp	—
Engine declared	KHD F6L 913	—	—
Displacement declared	6.13 L	—	—
Maximum torque declared	285 lb·ft · 387 N·m	281 lb·ft · 381 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	independent dry double clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	—	16.0 gpm · 60.4 L/min	—
Pressure declared	—	3,481 psi · 240 bar	—
Three-point lift at ends declared	11,464 lb · 5,200 kg	11,464 lb · 5,200 kg	—
Rear PTO speeds declared	540/1000/750 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	9,811 lb · 4,450 kg	10,670 lb · 4,840 kg	+9% DX 6.30
Maximum permissible mass declared	16,535 lb · 7,500 kg	14,991 lb · 6,800 kg	+10% AgroPrima 6.16
Wheelbase declared	107.0 in · 2,718 mm	106.4 in · 2,703 mm	—
Length declared	178.3 in · 4,530 mm	179.1 in · 4,550 mm	—
Width declared	82.1 in · 2,085 mm	90.7 in · 2,304 mm	+11% DX 6.30
Height declared	107.7 in · 2,735 mm	104.3 in · 2,650 mm	—
Ground clearance declared	19.9 in · 505 mm	21.3 in · 540 mm	+7% DX 6.30
Turning radius, braked declared	—	16.2 ft · 4.94 m	—
Fuel tank declared	139.5 qt · 132 L	126.8 qt · 120 L	+10% AgroPrima 6.16

Source

Source