Deutz-Fahr AgroPrima 4.51 vs VALMET 6250 HiTech

12 material differences

Tractor one

1989–1995

No measured PTO figure

Tractor two

2000–2006

No measured PTO figure

Which should you choose?

Read our verdict on the AgroPrima 4.51 and the 6250 HiTech → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 4 fields identical or within 5%, which is not counted as material

Deutz-Fahr AgroPrima 4.51 and VALMET 6250 HiTech, field by field
Field	AgroPrima 4.51	6250 HiTech	Gap
Engine
Engine declared	KHD BF4L 913 T	VALMET 420 DSRE or 44 DT	differs
Displacement declared	4.09 L	4.40 L	+8% 6250 HiTech
Maximum torque declared	236 lb·ft · 320 N·m	—	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	—	Electrically operated dry Fichtel & Sachs single-plate clutch	—
Hydraulics & hitch
Pump flow declared	12.2 gpm · 46.0 L/min	19.4 gpm · 73.5 L/min	+60% 6250 HiTech
Pressure declared	3,481 psi · 240 bar	2,901 psi · 200 bar	+20% AgroPrima 4.51
Three-point lift at ends declared	8,378 lb · 3,800 kg	12,588 lb · 5,710 kg	+50% 6250 HiTech
Rear PTO speeds declared	540/1000/750 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	7,848 lb · 3,560 kg	9,698 lb · 4,399 kg	+24% 6250 HiTech
Maximum permissible mass declared	14,551 lb · 6,600 kg	19,842 lb · 9,000 kg	+36% 6250 HiTech
Wheelbase declared	96.1 in · 2,441 mm	91.6 in · 2,326 mm	—
Length declared	158.7 in · 4,032 mm	176.2 in · 4,475 mm	+11% 6250 HiTech
Width declared	81.2 in · 2,063 mm	85.8 in · 2,179 mm	+6% 6250 HiTech
Height declared	103.9 in · 2,640 mm	109.1 in · 2,771 mm	—
Ground clearance declared	17.7 in · 450 mm	17.1 in · 434 mm	—
Turning radius, braked declared	13.9 ft · 4.24 m	15.3 ft · 4.65 m	+10% 6250 HiTech
Fuel tank declared	137.4 qt · 130 L	174.4 qt · 165.0 L	+27% 6250 HiTech

Source

Source