Deutz-Fahr AgroPrima 4.51 or VALMET 6250 HiTech?
Which should you choose?
On performance, every comparable figure that differs favours the VALMET 6250 HiTech: hydraulic flow, three-point lift and maximum permissible mass. It is also ahead on forward gears. On features, the Deutz-Fahr AgroPrima 4.51 is ahead on PTO speeds.
- The Deutz-Fahr AgroPrima 4.51 suits PTO-driven implements (mowers, balers, pumps) better on this data: offers 750 rpm.
- The VALMET 6250 HiTech suits loader and hydraulic implement work better on this data: 60% (27.5 L/min / 7.3 gpm) more hydraulic flow and 50% (1,910 kg / 4,211 lb) more three-point lift.
- The VALMET 6250 HiTech suits road haulage better on this data: 36% (2,400 kg / 5,291 lb) more maximum permissible mass.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | AgroPrima 4.51 | 6250 HiTech | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 56.0 kW (75.1 hp)Traktorenlexikon, “Deutz-Fahr AgroPrima 4.51” | 56.2 kW (75.4 hp)Traktorenlexikon, “Valmet 6250 HiTech” | EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the AgroPrima 4.51 and the 6250 HiTech. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the AgroPrima 4.51 and the 6250 HiTech. |
| Which pumps more oil for implements? | 46.0 L/min (12.2 gpm)Traktorenlexikon, “Deutz-Fahr AgroPrima 4.51” | 73.5 L/min (19.4 gpm)Traktorenlexikon, “Valmet 6250 HiTech” | AheadThe VALMET 6250 HiTech has 60% more hydraulic flow (27.5 L/min / 7.3 gpm) than the Deutz-Fahr AgroPrima 4.51 (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 3,800 kg (8,378 lb)Traktorenlexikon, “Deutz-Fahr AgroPrima 4.51” | 5,710 kg (12,588 lb)Traktorenlexikon, “Valmet 6250 HiTech” | AheadThe VALMET 6250 HiTech has 50% more lift (1,910 kg / 4,211 lb) than the Deutz-Fahr AgroPrima 4.51 (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 3,560 kg (7,848 lb)Traktorenlexikon, “Deutz-Fahr AgroPrima 4.51” | 4,399 kg (9,698 lb)Traktorenlexikon, “Valmet 6250 HiTech” | Ahead (a fact, not an advantage)The VALMET 6250 HiTech is 24% heavier (839 kg / 1,850 lb) than the Deutz-Fahr AgroPrima 4.51 (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | 6,600 kg (14,551 lb)Traktorenlexikon, “Deutz-Fahr AgroPrima 4.51” | 9,000 kg (19,842 lb)Traktorenlexikon, “Valmet 6250 HiTech” | AheadThe VALMET 6250 HiTech has 36% higher maximum permissible mass (2,400 kg / 5,291 lb) than the Deutz-Fahr AgroPrima 4.51 (both maximum permissible mass, as stated by the source). |
| Which has the wider choice of gears? | 15 to 18Traktorenlexikon, “Deutz-Fahr AgroPrima 4.51” | 36Traktorenlexikon, “Valmet 6250 HiTech” | AheadThe VALMET 6250 HiTech has 100% more forward gears (18 gears) than the Deutz-Fahr AgroPrima 4.51 (both forward gears, as stated by the source). |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the AgroPrima 4.51 and the 6250 HiTech. |
| Which is faster on the road? | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Deutz-Fahr AgroPrima 4.51” | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Valmet 6250 HiTech” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540/1000/750 rpmTraktorenlexikon, “Deutz-Fahr AgroPrima 4.51” | 540/1000 rpmTraktorenlexikon, “Valmet 6250 HiTech” | AheadThe Deutz-Fahr AgroPrima 4.51 offers 750 rpm at the PTO, which the VALMET 6250 HiTech does not (as stated by the sources). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Deutz-Fahr AgroPrima 4.51” | independentTraktorenlexikon, “Valmet 6250 HiTech” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | Two-wheel or four-wheel driveTraktorenlexikon, “Deutz-Fahr AgroPrima 4.51” | 4WDTraktorenlexikon, “Valmet 6250 HiTech” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1989–1995 | 2000–2006 | Ahead (a fact, not an advantage)The VALMET 6250 HiTech is newer: production began 11 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The VALMET 6250 HiTech has 60% more hydraulic flow (27.5 L/min / 7.3 gpm) than the Deutz-Fahr AgroPrima 4.51 (both pump flow, as stated by the source).
- The VALMET 6250 HiTech has 50% more lift (1,910 kg / 4,211 lb) than the Deutz-Fahr AgroPrima 4.51 (both lift at the hitch ends, as stated by the source).
- The VALMET 6250 HiTech is 24% heavier (839 kg / 1,850 lb) than the Deutz-Fahr AgroPrima 4.51 (both unladen weight, as stated by the source).
- The VALMET 6250 HiTech has 36% higher maximum permissible mass (2,400 kg / 5,291 lb) than the Deutz-Fahr AgroPrima 4.51 (both maximum permissible mass, as stated by the source).
- The VALMET 6250 HiTech has 100% more forward gears (18 gears) than the Deutz-Fahr AgroPrima 4.51 (both forward gears, as stated by the source).
- The Deutz-Fahr AgroPrima 4.51 offers 750 rpm at the PTO, which the VALMET 6250 HiTech does not (as stated by the sources).
- The VALMET 6250 HiTech is newer: production began 11 years later. We hold no parts-availability data, so there is no call on parts.
- Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO independence: every PTO is independent.
- Even on drive: every machine is available with four-wheel drive.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power and a creeper range.
← Every figure for both machines, side by side, with sources