10 material differences · fewer than 12
Tractor oneDeutz (KHD) D 68061974–1980No measured PTO figureTractor twoInternational Harvester 6741973–1975No measured PTO figure
Which should you choose?
Read our verdict on the D 6806 and the 674 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | D 6806 | 674 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 66 hp | 64.1 hp | — |
| Engine declared | KHD F4L 912 | INTERNATIONAL-HARVESTER D-239 | differs |
| Displacement declared | 3.77 L | 3.91 L | — |
| Maximum torque declared | 177 lb·ft · 240 N·m | 153 lb·ft · 207 N·m | +16% D 6806 |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 15.5–18.6 mph · 25–30 km/h | differs |
| Clutch declared | Independent dry Fichtel & Sachs double clutch | Pedal-operated dry LAYCOCK single-plate clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 7.5 gpm · 28.3 L/min | 11.1–12.6 gpm · 42.1–47.7 L/min | differs |
| Pressure declared | 2,901 psi · 200 bar | — | — |
| Rear PTO speeds declared | 540 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,085 lb · 2,760 kg | 5,106 lb · 2,316 kg | +19% D 6806 |
| Maximum permissible mass declared | 11,023 lb · 5,000 kg | — | — |
| Wheelbase declared | 84.6 in · 2,150 mm | 84.5 in · 2,146 mm | — |
| Length declared | 146.1 in · 3,710 mm | 140.6 in · 3,570 mm | — |
| Width declared | 76.4 in · 1,940 mm | 68.9 in · 1,750 mm | +11% D 6806 |
| Ground clearance declared | 19.7 in · 500 mm | 14.4 in · 365 mm | +37% D 6806 |
| Turning radius, braked declared | 11.7 ft · 3.56 m | 10.9 ft · 3.31 m | +8% D 6806 |
| Fuel tank declared | — | 81.2 qt · 76.8 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz (KHD) D 6806 sources
- Source: Traktorenlexikon, “Deutz D 6806”
- Source: Traktorenlexikon, “Deutz D 6006”
International Harvester 674 sources
- Source: Traktorenlexikon, “IHC 674”
- Source: Traktorenlexikon, “IHC 574”
- Source: Traktorenlexikon, “IHC 674 (USA)”