9 material differences · fewer than 12
Tractor oneDeutz (KHD) D 60051966–1967No measured PTO figureTractor twoMassey Ferguson MF 5651976–1982No measured PTO figure
Which should you choose?
Read our verdict on the D 6005 and the MF 565 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | D 6005 | MF 565 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 57.0 hp | 59.3 hp | — |
| Engine declared | KHD F4L 812 D | Perkins A 4.236 | differs |
| Displacement declared | 3.40 L | 3.87 L | +14% MF 565 |
| Maximum torque declared | 148 lb·ft · 200 N·m | 178 lb·ft · 241.9 N·m | +21% MF 565 |
| Transmission | |||
| Top speed declared | 12.4–16.8 mph · 20–27 km/h | 15.5 mph · 25 km/h | differs |
| Clutch declared | Dry double clutch | Pedal-operated, dry and air-cooled single-disc clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | — | 16.5 gpm · 62.5 L/min | — |
| Pressure declared | 2,901 psi · 200 bar | — | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,743 lb · 2,605 kg | 6,107 lb · 2,770 kg | +6% MF 565 |
| Maximum permissible mass declared | 11,023 lb · 5,000 kg | — | — |
| Wheelbase declared | 84.6 in · 2,150 mm | 87.5 in · 2,223 mm | — |
| Length declared | 144.5 in · 3,670 mm | 148.4 in · 3,770 mm | — |
| Width declared | 76.8 in · 1,950 mm | 72.8 in · 1,850 mm | +5% D 6005 |
| Ground clearance declared | 19.9 in · 505 mm | 13.0 in · 330 mm | +53% D 6005 |
| Turning radius, braked declared | 10.8 ft · 3.30 m | 11.2 ft · 3.41 m | — |
| Fuel tank declared | 84.5 qt · 80 L | 84.1 qt · 79.6 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz (KHD) D 6005 sources
- Source: Traktorenlexikon, “Deutz D 6005”
Massey Ferguson MF 565 sources
- Source: Traktorenlexikon, “Massey Ferguson MF 565”
- Source: Traktorenlexikon, “Massey Ferguson MF 168 & MF 168A”