8 material differences · fewer than 12
Tractor oneDeutz (KHD) D 55051965–1967No measured PTO figureTractor twoInternational Harvester Farmall 5441968–1973No measured PTO figure
Which should you choose?
Read our verdict on the D 5505 and the Farmall 544 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | D 5505 | Farmall 544 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 51.1 hp | 51.2 hp | — |
| Engine declared | KHD F4L 812 S | INTERNATIONAL HARVESTER C-200 | differs |
| Displacement declared | 3.40 L | — | — |
| Maximum torque declared | 127 lb·ft · 173 N·m | 171 lb·ft · 232 N·m | +34% Farmall 544 |
| Transmission | |||
| Top speed declared | 12.4–17.4 mph · 20–28 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | — | Pedal-operated dry single-plate clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 7.1 gpm · 27 L/min | 12.0 gpm · 45.4 L/min | +68% Farmall 544 |
| Pressure declared | 2,538 psi · 175 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 5,401 lb · 2,450 kg | 6,098 lb · 2,766 kg | +13% Farmall 544 |
| Maximum permissible mass declared | 8,598 lb · 3,900 kg | — | — |
| Wheelbase declared | 86.6 in · 2,200 mm | 90.5 in · 2,299 mm | — |
| Length declared | 146.9 in · 3,730 mm | 138.0 in · 3,505 mm | +6% D 5505 |
| Width declared | 70.9 in · 1,800 mm | 71.0 in · 1,803 mm | — |
| Ground clearance declared | 19.9 in · 505 mm | 13.0 in · 330 mm | +53% D 5505 |
| Turning radius, braked declared | 11.5 ft · 3.50 m | 8.7 ft · 2.64 m | +33% D 5505 |
| Fuel tank declared | — | 132.1 qt · 125.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz (KHD) D 5505 sources
- Source: Traktorenlexikon, “Deutz D 5505”
- Source: Traktorenlexikon, “Deutz D 5005”
International Harvester Farmall 544 sources
- Source: Traktorenlexikon, “Farmall Farmall 544”
- Source: Traktorenlexikon, “IHC 544”