DEUTZ-ALLIS 8030 vs Hürlimann D-550 Hydrostat
10 material differences · fewer than 12
Which should you choose?
Read our verdict on the 8030 and the D-550 Hydrostat → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | 8030 | D-550 Hydrostat | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 132.1 hp | 133.0 hp | — |
| Engine declared | ALLIS-CHALMERS 670 T | Mercedes-Benz 352 A | differs |
| Displacement declared | 6.98 L | 5.68 L | +23% 8030 |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 16.8 mph · 27 km/h | +11% 8030 |
| Clutch declared | Electro-hydraulically operated wet multi-disc clutch | — | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | — | — |
| Pump flow declared | 22.0 gpm · 83.3 L/min | 13.7 gpm · 52.0 L/min | +60% 8030 |
| Pressure declared | 3,771 psi · 260 bar | 2,987 psi · 206 bar | +26% 8030 |
| Three-point lift at ends declared | — | 6,393 lb · 2,900 kg | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 11,451 lb · 5,194 kg | 9,480 lb · 4,300 kg | +21% 8030 |
| Wheelbase declared | 106.0 in · 2,692 mm | 114.6 in · 2,910 mm | +8% D-550 Hydrostat |
| Length declared | 187.0 in · 4,750 mm | 174.4 in · 4,430 mm | +7% 8030 |
| Width declared | 93.4 in · 2,372 mm | 88.6 in · 2,250 mm | +5% 8030 |
| Height declared | 115.0 in · 2,921 mm | 76.8 in · 1,950 mm | +50% 8030 |
| Ground clearance declared | 21.0 in · 533 mm | — | — |
| Turning radius, braked declared | 12.5 ft · 3.80 m | — | — |
| Fuel tank declared | 239.9 qt · 227.0 L | — | — |
DEUTZ-ALLIS 8030 sources
Source
- Source: Traktorenlexikon, “Deutz-Allis 8030”
Hürlimann D-550 Hydrostat sources
Source
- Source: Traktorenlexikon, “Hürlimann D 550 Hydrostat”