DEUTZ-ALLIS 7145 vs Massey Ferguson MF 2725

9 material differences · fewer than 12

Tractor one

1987–1989

No measured PTO figure

Tractor two

1985–1987

No measured PTO figure

Which should you choose?

Read our verdict on the 7145 and the MF 2725 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 4 fields identical or within 5%, which is not counted as material

DEUTZ-ALLIS 7145 and Massey Ferguson MF 2725, field by field
Field	7145	MF 2725	Gap
Engine
Engine power, claimed claimed	144.0 hp	145.1 hp	—
Engine declared	K.H.D. BF6L 913 T	Perkins AT 6.354-4 CC	differs
Displacement declared	6.13 L	5.80 L	+6% 7145
Maximum torque declared	386 lb·ft · 523 N·m	364 lb·ft · 493 N·m	+6% 7145
Transmission
Top speed declared	18.6 mph · 30 km/h	21.7 mph · 35 km/h	+17% MF 2725
Clutch declared	—	Pedal-operated, dry and air-cooled single-disc clutch	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	27.3 gpm · 103.3 L/min	—	—
Three-point lift at ends declared	—	15,917 lb · 7,220 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	11,905 lb · 5,400 kg	13,448 lb · 6,100 kg	+13% MF 2725
Maximum permissible mass declared	—	16,535 lb · 7,500 kg	—
Wheelbase declared	103.5 in · 2,629 mm	107.3 in · 2,726 mm	—
Length declared	187.8 in · 4,770 mm	200.0 in · 5,080 mm	+6% MF 2725
Width declared	93.3 in · 2,370 mm	95.3 in · 2,420 mm	—
Height declared	109.8 in · 2,789 mm	116.5 in · 2,960 mm	+6% MF 2725
Ground clearance declared	24.4 in · 620 mm	19.3 in · 490 mm	+27% 7145
Turning radius, braked declared	—	16.1 ft · 4.90 m	—
Fuel tank declared	264.2 qt · 250.0 L	225.1 qt · 213.0 L	+17% 7145

Source

Source