DEUTZ-ALLIS 6275 vs Massey Ferguson MF 3055 (A)

7 material differences · fewer than 12

Tractor one

1986–1990

No measured PTO figure

Tractor two

1993–1995

No measured PTO figure

Which should you choose?

Read our verdict on the 6275 and the MF 3055 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

7 material differences · 8 fields identical or within 5%, which is not counted as material

DEUTZ-ALLIS 6275 and Massey Ferguson MF 3055 (A), field by field
Field	6275	MF 3055 (A)	Gap
Engine
Engine power, claimed claimed	73.0 hp	74 hp	—
Engine declared	KHD F4L 913	Perkins A 4.248	differs
Displacement declared	4.09 L	4.07 L	—
Maximum torque declared	187 lb·ft · 254 N·m	209 lb·ft · 283 N·m	+11% MF 3055 (A)
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	Independent dry double clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	11.4 gpm · 43.1 L/min	13.2 gpm · 50.0 L/min	+16% MF 3055 (A)
Pressure declared	3,481 psi · 240 bar	—	—
Three-point lift at ends declared	7,273 lb · 3,299 kg	8,940 lb · 4,055 kg	+23% MF 3055 (A)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	7,826 lb · 3,550 kg	8,598 lb · 3,900 kg	+10% MF 3055 (A)
Wheelbase declared	91.6 in · 2,327 mm	93.3 in · 2,371 mm	—
Length declared	155.5 in · 3,950 mm	160.2 in · 4,070 mm	—
Width declared	82.3 in · 2,090 mm	80.7 in · 2,049 mm	—
Height declared	101.3 in · 2,573 mm	105.1 in · 2,670 mm	—
Ground clearance declared	18.0 in · 457 mm	14.6 in · 370 mm	+24% 6275
Fuel tank declared	91.9 qt · 87.0 L	156.4 qt · 148.0 L	+70% MF 3055 (A)

Source

Source