DEUTZ-ALLIS 6035 vs Deutz-Fahr D 3607
2 material differences · fewer than 12
Which should you choose?
Read our verdict on the 6035 and the D 3607 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
2 material differences · 13 fields identical or within 5%, which is not counted as material
| Field | 6035 | D 3607 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 33.0 hp | 34 hp | — |
| Engine declared | KHD F2L 912 | KHD F2L 912 | — |
| Displacement declared | 1.88 L | 1.88 L | — |
| Maximum torque declared | 86 lb·ft · 117 N·m | 86 lb·ft · 117 N·m | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 15.5–18.6 mph · 25–30 km/h | differs |
| Hydraulics & hitch | |||
| Pump flow declared | — | 9.2 gpm · 35 L/min | — |
| Three-point lift at ends declared | 4,189 lb · 1,900 kg | 4,189 lb · 1,900 kg | — |
| Rear PTO speeds declared | 540 rpm | 600 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 4,255 lb · 1,930 kg | 4,255 lb · 1,930 kg | — |
| Maximum permissible mass declared | 7,055 lb · 3,200 kg | 7,055 lb · 3,200 kg | — |
| Wheelbase declared | 73.5 in · 1,867 mm | 73.4 in · 1,865 mm | — |
| Length declared | 131.1 in · 3,330 mm | 131.1 in · 3,330 mm | — |
| Width declared | 63.0 in · 1,600 mm | 63.0 in · 1,600 mm | — |
| Height declared | 92.5 in · 2,350 mm | 92.5 in · 2,350 mm | — |
| Ground clearance declared | 18.1 in · 460 mm | 18.1 in · 460 mm | — |
| Fuel tank declared | 74.0 qt · 70.0 L | 74.0 qt · 70 L | — |
DEUTZ-ALLIS 6035 sources
Source
- Source: Traktorenlexikon, “Deutz-Allis 6035”
- Source: Traktorenlexikon, “Deutz D 2506”
Deutz-Fahr D 3607 sources
Source
- Source: Traktorenlexikon, “Deutz-Fahr D 3607”
- Source: Traktorenlexikon, “Deutz D 2506”