DEUTZ-ALLIS 6035 or Deutz-Fahr D 3607?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the 6035 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the D 3607 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 6035 | D 3607 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 24.6 kW (33.0 hp)Traktorenlexikon, “Deutz-Allis 6035” | 25 kW (34 hp)Traktorenlexikon, “Deutz-Fahr D 3607” | Not comparableNot comparable on power at the PTO shaft: the 6035 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the D 3607 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 6035 and the D 3607. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 6035 and the D 3607. |
| Which pumps more oil for implements? | — | 35 L/min (9.2 gpm)Traktorenlexikon, “Deutz-Fahr D 3607” | No figureNo call on hydraulic flow: no figure on record for the 6035. |
| Which lifts more on the three-point hitch? | 1,900 kg (4,189 lb)Traktorenlexikon, “Deutz-Allis 6035” | 1,900 kg (4,189 lb)Traktorenlexikon, “Deutz-Fahr D 3607” | EvenEven on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which is heavier, for traction? | 1,930 kg (4,255 lb)Traktorenlexikon, “Deutz-Allis 6035” | 1,930 kg (4,255 lb)Traktorenlexikon, “Deutz-Fahr D 3607” | EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which may carry more ballast and load? | 3,200 kg (7,055 lb)Traktorenlexikon, “Deutz-Allis 6035” | 3,200 kg (7,055 lb)Traktorenlexikon, “Deutz-Fahr D 3607” | EvenEven on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which has the wider choice of gears? | 8Traktorenlexikon, “Deutz-Allis 6035” | 8Traktorenlexikon, “Deutz-Fahr D 3607” | EvenEven on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 6035 and the D 3607. |
| Which is faster on the road? | 25 km/h (15.5 mph)Traktorenlexikon, “Deutz-Allis 6035” | 25 km/h (15.5 mph) to 30 km/h (18.6 mph)Traktorenlexikon, “Deutz-Fahr D 3607” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540 rpmTraktorenlexikon, “Deutz-Allis 6035” | 600 rpmTraktorenlexikon, “Deutz-Fahr D 3607” | No figureNo call on PTO speeds: no standard PTO speed stated for the D 3607. |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Deutz-Allis 6035” | independentTraktorenlexikon, “Deutz-Fahr D 3607” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | 2WDTraktorenlexikon, “Deutz-Allis 6035” | 2WDTraktorenlexikon, “Deutz-Fahr D 3607” | EvenEven on drive: all two-wheel drive. |
| Which is newer, and what about parts? | 1986 | 1982–1988 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- Even on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the difference is under the 25% threshold, too small to call.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO independence: every PTO is independent.
- Even on drive: all two-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- Not comparable on power at the PTO shaft: the 6035 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the D 3607 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, a creeper range and PTO speeds.
← Every figure for both machines, side by side, with sources