7 material differences · fewer than 12
Tractor oneClaas Xerion 38002007–2013No measured PTO figureTractor twoNew Holland T 80502007–2011No measured PTO figure
Which should you choose?
Read our verdict on the Xerion 3800 and the T 8050 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | Xerion 3800 | T 8050 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 339 hp | 321 hp | +6% Xerion 3800 |
| Engine declared | — | CUMMINS 6 TAA-9004 (TIER-III) | — |
| Displacement declared | — | 8.85 L | — |
| Maximum torque declared | 1,195 lb·ft · 1,620 N·m | 994 lb·ft · 1,348 N·m | +20% Xerion 3800 |
| Transmission | |||
| Top speed declared | 31.1 mph · 50 km/h | 24.9–31.1 mph · 40–50 km/h | differs |
| Clutch declared | — | Electro-hydraulically operated wet multi-disc clutch | — |
| Hydraulics & hitch | |||
| Hydraulic control declared | Load sensing | — | — |
| Pump flow declared | — | 44.0 gpm · 166.6 L/min | — |
| Pressure declared | — | 3,336 psi · 230 bar | — |
| Rear PTO speeds declared | 1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 22,487 lb · 10,200 kg | 24,268 lb · 11,008 kg | +8% T 8050 |
| Maximum permissible mass declared | — | 30,865 lb · 14,000 kg | — |
| Wheelbase declared | 129.9 in · 3,300 mm | 121.2 in · 3,078 mm | +7% Xerion 3800 |
| Length declared | 261.0 in · 6,630 mm | 229.5 in · 5,829 mm | +14% Xerion 3800 |
| Width declared | 98.0 in · 2,490 mm | 98.0 in · 2,490 mm | — |
| Ground clearance declared | 18.5–22.4 in · 470–570 mm | 14.6 in · 372 mm | differs |
| Turning radius, braked declared | 19.7 ft · 6.00 m | — | — |
| Fuel tank declared | — | 720.7 qt · 682.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Claas Xerion 3800 sources
- Source: Traktorenlexikon, “Claas Xerion 3800”
New Holland T 8050 sources
- Source: Traktorenlexikon, “New Holland T8050”