Claas Xerion 3300 or Fendt 933 Vario?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the Xerion 3300 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 933 Vario has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Claas Xerion 3300 and Fendt 933 Vario, with the call on each
QuestionXerion 3300933 VarioCall
Which puts more power through the PTO shaft?224 kW (300 hp)Traktorenlexikon, “Claas Xerion 3300”220 kW (295 hp)Traktorenlexikon, “Fendt 933 Vario”Not comparableNot comparable on power at the PTO shaft: the Xerion 3300 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 933 Vario has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the Xerion 3300 and the 933 Vario.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the Xerion 3300 and the 933 Vario.
Which pumps more oil for implements?——No figureNo call on hydraulic flow: no figure on record for the Xerion 3300 and the 933 Vario.
Which lifts more on the three-point hitch?11,700 kg (25,794 lb)Traktorenlexikon, “Claas Xerion 3300”—No figureNo call on three-point lift: no figure on record for the 933 Vario.
Which is heavier, for traction?10,200 kg (22,487 lb)Traktorenlexikon, “Claas Xerion 3300”10,260 kg (22,619 lb)Traktorenlexikon, “Fendt 933 Vario”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?—18,000 kg (39,683 lb)Traktorenlexikon, “Fendt 933 Vario”No figureNo call on maximum permissible mass: no figure on record for the Xerion 3300.
Which has the wider choice of gears?Stepless (CVT)Traktorenlexikon, “Claas Xerion 3300”Stepless (CVT)Traktorenlexikon, “Fendt 933 Vario”EvenEven on gears: every machine is stepless.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the Xerion 3300 and the 933 Vario.
Which is faster on the road?50 km/h (31.1 mph)Traktorenlexikon, “Claas Xerion 3300”50 km/h (31.1 mph) to 60 km/h (37.3 mph)Traktorenlexikon, “Fendt 933 Vario”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?1000 rpmTraktorenlexikon, “Claas Xerion 3300”—No figureNo call on PTO speeds: no standard PTO speed stated for the 933 Vario.
Which PTO runs independently of the ground drive?——No figureNo call on PTO independence: not stated for the Xerion 3300 and the 933 Vario.
Which drives on both axles?4WDTraktorenlexikon, “Claas Xerion 3300”4WDTraktorenlexikon, “Fendt 933 Vario”; OECD test report 2543, 2010EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?2004–20132006–EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on gears: every machine is stepless.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the Xerion 3300 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 933 Vario has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, three-point lift, maximum permissible mass, a creeper range, PTO speeds and PTO independence.

← Every figure for both machines, side by side, with sources