Claas Celtis 436 vs Deutz-Fahr Agroplus 410

9 material differences · fewer than 12

Tractor one

Claas Celtis 436

2003–2008

No measured PTO figure

Tractor two

Deutz-Fahr Agroplus 410

from 2009

No measured PTO figure

Which should you choose?

We will not advise between these two machines, because the drive differs (4WD; Two-wheel or four-wheel drive); they were not built in overlapping years (2003–2008; 2009–2009). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

9 material differences · 3 fields identical or within 5%, which is not counted as material

Claas Celtis 436 and Deutz-Fahr Agroplus 410, field by field
FieldCeltis 436Agroplus 410Gap
Engine
Engine power, claimed claimed83 hp83.8 hp
Engine declaredSame 1000.4 WTI 2 E3
Displacement declared4.00 L
Maximum torque declared246 lb·ft · 333 N·m254 lb·ft · 345 N·m
Transmission
Top speed declared24.9 mph · 40 km/h24.9 mph · 40 km/h
Clutch declaredHydraulically operated single-plate dry clutch
Hydraulics & hitch
Pump flow declared18.2 gpm · 69 L/min10.8 gpm · 41.0 L/min+68% Celtis 436
Pressure declared2,611 psi · 180 bar
Rear PTO speeds declared540/1000 rpm540/540E/1000 rpmdiffers
Weight & dimensions
Unladen weight declared8,289 lb · 3,760 kg7,518 lb · 3,410 kg+10% Celtis 436
Wheelbase declared98.0 in · 2,489 mm87.8 in · 2,230 mm+12% Celtis 436
Length declared152.4 in · 3,872 mm140.2 in · 3,560 mm+9% Celtis 436
Width declared98.8 in · 2,510 mm81.5–91.7 in · 2,070–2,330 mmdiffers
Height declared104.5 in · 2,654 mm96.7 in · 2,455 mm+8% Celtis 436
Ground clearance declared16.5 in · 420 mm15.4 in · 390 mm+8% Celtis 436
Turning radius, braked declared12.8 ft · 3.90 m
Fuel tank declared153.2 qt · 145 L95.1 qt · 90 L+61% Celtis 436

Claas Celtis 436 sources

Source
  • Source: Traktorenlexikon, “Claas Celtis 436”
  • Source: OECD test report 2220, 2005

Deutz-Fahr Agroplus 410 sources

Source
  • Source: Traktorenlexikon, “Deutz-Fahr Agroplus 410”