CASE-INTERNATIONAL 995 (DT) vs SAME Explorer 90 (DT)

6 material differences · fewer than 12

Tractor one

1990–1993

No measured PTO figure

Tractor two

1986–1990

No measured PTO figure

Which should you choose?

Read our verdict on the 995 (DT) and the Explorer 90 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

6 material differences · 8 fields identical or within 5%, which is not counted as material

CASE-INTERNATIONAL 995 (DT) and SAME Explorer 90 (DT), field by field
Field	995 (DT)	Explorer 90 (DT)	Gap
Engine
Engine power, claimed claimed	88.8 hp	88.8 hp	—
Engine declared	IHC D-268	SAME 1000.4 A Turbo	differs
Displacement declared	4.39 L	4.00 L	+10% 995 (DT)
Maximum torque declared	221 lb·ft · 299 N·m	224 lb·ft · 304 N·m	—
Transmission
Top speed declared	21.7 mph · 35 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated dry Rockford single-disc clutch	Pedal operated dry SAME single disc clutch	differs
Hydraulics & hitch
Hydraulic control declared	—	Load sensing	—
Pump flow declared	—	9.5 gpm · 35.8 L/min	—
Pressure declared	2,698 psi · 186 bar	—	—
Three-point lift at ends declared	5,351 lb · 2,427 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	6,535 lb · 2,964 kg	6,614 lb · 3,000 kg	—
Wheelbase declared	88.0 in · 2,235 mm	95.1 in · 2,415 mm	+8% Explorer 90 (DT)
Length declared	151.4 in · 3,845 mm	145.2 in · 3,687 mm	—
Width declared	73.0 in · 1,854 mm	73.6 in · 1,870 mm	—
Height declared	105.1 in · 2,670 mm	102.1 in · 2,593 mm	—
Ground clearance declared	22.0 in · 559 mm	20.5 in · 520 mm	+8% 995 (DT)
Turning radius, braked declared	—	9.6 ft · 2.94 m	—
Fuel tank declared	118.3 qt · 112.0 L	116.2 qt · 110.0 L	—

Source

Source