CASE-INTERNATIONAL 995 (DT) vs Massey Ferguson MF 6140 (A)

10 material differences · fewer than 12

Tractor one

1990–1993

No measured PTO figure

Tractor two

1995–1999

No measured PTO figure

Which should you choose?

Read our verdict on the 995 (DT) and the MF 6140 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 6 fields identical or within 5%, which is not counted as material

CASE-INTERNATIONAL 995 (DT) and Massey Ferguson MF 6140 (A), field by field
Field	995 (DT)	MF 6140 (A)	Gap
Engine
Engine power, claimed claimed	88.8 hp	88.8 hp	—
Engine declared	IHC D-268	Perkins 1004.4 T2	differs
Displacement declared	4.39 L	3.99 L	+10% 995 (DT)
Maximum torque declared	221 lb·ft · 299 N·m	249 lb·ft · 338 N·m	+13% MF 6140 (A)
Transmission
Top speed declared	21.7 mph · 35 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated dry Rockford single-disc clutch	Mechanically operated dry Valeo single-plate clutch	differs
Hydraulics & hitch
Pump flow declared	—	13.6 gpm · 51.5 L/min	—
Pressure declared	2,698 psi · 186 bar	2,727 psi · 188 bar	—
Three-point lift at ends declared	5,351 lb · 2,427 kg	7,688 lb · 3,487 kg	+44% MF 6140 (A)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	6,535 lb · 2,964 kg	8,069 lb · 3,660 kg	+23% MF 6140 (A)
Wheelbase declared	88.0 in · 2,235 mm	93.3 in · 2,371 mm	+6% MF 6140 (A)
Length declared	151.4 in · 3,845 mm	158.2 in · 4,019 mm	—
Width declared	73.0 in · 1,854 mm	72.8 in · 1,850 mm	—
Height declared	105.1 in · 2,670 mm	104.5 in · 2,654 mm	—
Ground clearance declared	22.0 in · 559 mm	14.1 in · 357 mm	+57% 995 (DT)
Fuel tank declared	118.3 qt · 112.0 L	137.4 qt · 130.0 L	+16% MF 6140 (A)

Source

Source