10 material differences · fewer than 12

Tractor oneCASE-INTERNATIONAL 895 (DT)1990–1993No measured PTO figureTractor twoHürlimann H-658 XA2000–2004No measured PTO figure

Which should you choose?

Read our verdict on the 895 (DT) and the H-658 XA → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 4 fields identical or within 5%, which is not counted as material

CASE-INTERNATIONAL 895 (DT) and Hürlimann H-658 XA, field by field
Field	895 (DT)	H-658 XA	Gap
Engine
Engine power, claimed claimed	82 hp	82 hp	—
Engine declared	IHC D-268	Hürlimann 1000.4 WT-4	differs
Displacement declared	4.39 L	4.00 L	+10% 895 (DT)
Maximum torque declared	209 lb·ft · 284 N·m	226 lb·ft · 306 N·m	+8% H-658 XA
Transmission
Top speed declared	21.7 mph · 35 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated dry Rockford single-plate clutch as driving clutch	Pedal operated dry SDF single disc clutch	differs
Hydraulics & hitch
Hydraulic control declared	—	Load sensing	—
Pump flow declared	—	11.8 gpm · 44.5 L/min	—
Pressure declared	—	3,046 psi · 210 bar	—
Rear PTO speeds declared	540/1000 rpm	540/540E/1000 rpm	differs
Weight & dimensions
Unladen weight declared	6,863 lb · 3,113 kg	5,864 lb · 2,660 kg	+17% 895 (DT)
Maximum permissible mass declared	—	11,023 lb · 5,000 kg	—
Wheelbase declared	88.0 in · 2,235 mm	86.2 in · 2,190 mm	—
Length declared	142.0 in · 3,607 mm	153.5 in · 3,900 mm	+8% H-658 XA
Width declared	78.0 in · 1,981 mm	80.7 in · 2,050 mm	—
Height, over the cab declared	97.4 in · 2,474 mm	98.0 in · 2,490 mm	—
Ground clearance declared	22.0 in · 559 mm	15.0 in · 380 mm	+47% 895 (DT)
Fuel tank declared	118.3 qt · 112.0 L	95.1 qt · 90.0 L	+24% 895 (DT)

Source

Source