CASE-INTERNATIONAL 695 (DT) vs Landini 7830 (DT) TL-20 N/F (TL-20 DT/F)

8 material differences · fewer than 12

Tractor one

1990–1993

No measured PTO figure

Tractor two

1983–1987

No measured PTO figure

Which should you choose?

Read our verdict on the 695 (DT) and the 7830 (DT) TL-20 N/F (TL-20 DT/F) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 5 fields identical or within 5%, which is not counted as material

CASE-INTERNATIONAL 695 (DT) and Landini 7830 (DT) TL-20 N/F (TL-20 DT/F), field by field
Field	695 (DT)	7830 (DT) TL-20 N/F (TL-20 DT/F)	Gap
Engine
Engine power, claimed claimed	72.0 hp	71 hp	—
Engine declared	IHC D-239	Perkins A 4.236	differs
Displacement declared	3.91 L	3.87 L	—
Maximum torque declared	163 lb·ft · 221 N·m	202 lb·ft · 274 N·m	+24% 7830 (DT) TL-20 N/F (TL-20 DT/F)
Transmission
Top speed declared	21.7 mph · 35 km/h	18.6 mph · 30 km/h	+17% 695 (DT)
Clutch declared	Pedal-operated dry Rockford single-plate clutch designed as driving clutch	—	—
Hydraulics & hitch
Pump flow declared	—	10.2 gpm · 38.7 L/min	—
Pressure declared	2,698 psi · 186 bar	—	—
Three-point lift at ends declared	5,351 lb · 2,427 kg	6,724 lb · 3,050 kg	+26% 7830 (DT) TL-20 N/F (TL-20 DT/F)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	6,832 lb · 3,099 kg	5,986 lb · 2,715 kg	+14% 695 (DT)
Wheelbase declared	88.0 in · 2,235 mm	87.0 in · 2,210 mm	—
Length declared	151.4 in · 3,845 mm	147.6 in · 3,750 mm	—
Width declared	73.0 in · 1,854 mm	78.7 in · 1,999 mm	+8% 7830 (DT) TL-20 N/F (TL-20 DT/F)
Height declared	105.1 in · 2,670 mm	94.4 in · 2,399 mm	+11% 695 (DT)
Ground clearance declared	—	21.1 in · 535 mm	—
Turning radius, braked declared	—	12.8 ft · 3.89 m	—
Fuel tank declared	118.3 qt · 112.0 L	63.9 qt · 60.5 L	+85% 695 (DT)

Source

Source