CASE-INTERNATIONAL 695 (DT) vs International Harvester Hydro 86

9 material differences · fewer than 12

Tractor one

1990–1993

No measured PTO figure

Tractor two

1976–1980

No measured PTO figure

Which should you choose?

Read our verdict on the 695 (DT) and the Hydro 86 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 3 fields identical or within 5%, which is not counted as material

CASE-INTERNATIONAL 695 (DT) and International Harvester Hydro 86, field by field
Field	695 (DT)	Hydro 86	Gap
Engine
Engine power, claimed claimed	72.0 hp	71 hp	—
Engine declared	IHC D-239	INTERNATIONAL HARVESTER C-291	differs
Displacement declared	3.91 L	—	—
Maximum torque declared	163 lb·ft · 221 N·m	220 lb·ft · 298 N·m	+35% Hydro 86
Transmission
Top speed declared	21.7 mph · 35 km/h	18.6 mph · 30 km/h	+17% 695 (DT)
Clutch declared	Pedal-operated dry Rockford single-plate clutch designed as driving clutch	Pedal operated ceramic clutch	differs
Hydraulics & hitch
Pump flow declared	—	12.0 gpm · 45.5 L/min	—
Pressure declared	2,698 psi · 186 bar	—	—
Three-point lift at ends declared	5,351 lb · 2,427 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	6,832 lb · 3,099 kg	8,166 lb · 3,704 kg	+20% Hydro 86
Wheelbase declared	88.0 in · 2,235 mm	103.0 in · 2,616 mm	+17% Hydro 86
Length declared	151.4 in · 3,845 mm	162.0 in · 4,115 mm	+7% Hydro 86
Width declared	73.0 in · 1,854 mm	89.4 in · 2,271 mm	+22% Hydro 86
Height declared	105.1 in · 2,670 mm	105.0 in · 2,667 mm	—
Ground clearance declared	—	21.0 in · 533 mm	—
Turning radius, braked declared	—	12.0 ft · 3.66 m	—
Fuel tank declared	118.3 qt · 112.0 L	123.9 qt · 117.3 L	—

Source

Source