CASE-INTERNATIONAL 495 (DT) vs Landini 5830 (DT) TL-22 N/G (TL-DT/L)

8 material differences · fewer than 12

Tractor one

1990–1993

No measured PTO figure

Tractor two

1983–1987

No measured PTO figure

Which should you choose?

Read our verdict on the 495 (DT) and the 5830 (DT) TL-22 N/G (TL-DT/L) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 8 fields identical or within 5%, which is not counted as material

CASE-INTERNATIONAL 495 (DT) and Landini 5830 (DT) TL-22 N/G (TL-DT/L), field by field
Field	495 (DT)	5830 (DT) TL-22 N/G (TL-DT/L)	Gap
Engine
Engine power, claimed claimed	51.2 hp	49.3 hp	—
Engine declared	IHC D-179	Perkins AD 3.152 S	differs
Displacement declared	2.93 L	2.50 L	+17% 495 (DT)
Maximum torque declared	134 lb·ft · 182 N·m	133 lb·ft · 181 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	Pedal-operated dry single-disc clutch and hand lever operated wet multi-disc clutch	Dry, air-cooled OMG double clutch	differs
Hydraulics & hitch
Pump flow declared	—	9.5 gpm · 36.1 L/min	—
Three-point lift at ends declared	3,704 lb · 1,680 kg	4,519 lb · 2,050 kg	+22% 5830 (DT) TL-22 N/G (TL-DT/L)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	5,199 lb · 2,358 kg	4,674 lb · 2,120 kg	+11% 495 (DT)
Wheelbase declared	79.1 in · 2,010 mm	81.9 in · 2,080 mm	—
Length declared	136.0 in · 3,454 mm	140.7 in · 3,575 mm	—
Width declared	66.0 in · 1,676 mm	69.1 in · 1,755 mm	—
Height declared	93.5 in · 2,375 mm	89.6 in · 2,275 mm	—
Ground clearance declared	22.1 in · 561 mm	17.1 in · 435 mm	+29% 495 (DT)
Turning radius, braked declared	11.1 ft · 3.38 m	12.4 ft · 3.79 m	+12% 5830 (DT) TL-22 N/G (TL-DT/L)
Fuel tank declared	80.0 qt · 75.7 L	63.9 qt · 60.5 L	+25% 495 (DT)

Source

Source