Case-IH MX 230 vs John Deere 8110 T

11 material differences · fewer than 12

Tractor one

2002–2005

No measured PTO figure

Tractor two

2000–2002

No measured PTO figure

Which should you choose?

Read our verdict on the MX 230 and the 8110 T → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 6 fields identical or within 5%, which is not counted as material

Case-IH MX 230 and John Deere 8110 T, field by field
Field	MX 230	8110 T	Gap
Engine
Engine power, claimed claimed	230.8 hp	192.4 hp	+20% MX 230
Engine declared	CUMMINS 6 TAA-830 (Tier-I)	John Deere-PowerTech 6.081 HRW	differs
Displacement declared	8.27 L	8.13 L	—
Maximum torque declared	778 lb·ft · 1,055 N·m	586 lb·ft · 794 N·m	+33% MX 230
Transmission
Top speed declared	24.9 mph · 40 km/h	18.6 mph · 30 km/h	+33% MX 230
Clutch declared	Oil-immersed Case-IH multi-plate clutch with nine plates	Pedal operated hydraulic wet John Deere multi-plate clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Hydraulic control declared	—	Load sensing	—
Pump flow declared	38.6 gpm · 146.1 L/min	31.8 gpm · 120.4 L/min	+21% MX 230
Pressure declared	3,024 psi · 208.5 bar	3,379 psi · 233 bar	+12% 8110 T
Three-point lift at ends declared	17,939 lb · 8,137 kg	10,971 lb · 4,976 kg	+64% MX 230
Rear PTO speeds declared	540/1000 rpm	1000 rpm	differs
Weight & dimensions
Unladen weight declared	20,111 lb · 9,122 kg	23,649 lb · 10,727 kg	+18% 8110 T
Maximum permissible mass declared	30,865 lb · 14,000 kg	31,500 lb · 14,288 kg	—
Wheelbase declared	118.3 in · 3,005 mm	89.0 in · 2,260 mm	+33% MX 230
Length declared	224.0 in · 5,690 mm	216.0 in · 5,487 mm	—
Width declared	120.0 in · 3,048 mm	134.0 in · 3,404 mm	+12% 8110 T
Height declared	124.0 in · 3,150 mm	123.4 in · 3,135 mm	—
Ground clearance declared	13.8 in · 350 mm	14.2 in · 360 mm	—
Fuel tank declared	519.9 qt · 492.0 L	519.9 qt · 492.0 L	—

Source

Source