Case-IH Magnum 7210 vs Ford 8730

11 material differences · fewer than 12

Tractor one

1994–1997

No measured PTO figure

Tractor two

1989–1994

No measured PTO figure

Which should you choose?

Read our verdict on the Magnum 7210 and the 8730 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 5 fields identical or within 5%, which is not counted as material

Case-IH Magnum 7210 and Ford 8730, field by field
Field	Magnum 7210	8730	Gap
Engine
Engine power, claimed claimed	153 hp	151.9 hp	—
Engine declared	CUMMINS 6 T-830	Ford 401	differs
Displacement declared	8.27 L	6.58 L	+26% Magnum 7210
Maximum torque declared	471 lb·ft · 638 N·m	387 lb·ft · 525 N·m	+22% Magnum 7210
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Oil-immersed CASE-IH multi-plate clutch, nine plates with 228.5 mm diameter	—	—
Hydraulics & hitch
Pump flow declared	29.1 gpm · 110 L/min	28.3 gpm · 107.1 L/min	—
Pressure declared	—	2,045 psi · 141 bar	—
Three-point lift at ends declared	15,873 lb · 7,200 kg	14,991 lb · 6,800 kg	+6% Magnum 7210
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	16,590 lb · 7,525 kg	14,859 lb · 6,740 kg	+12% Magnum 7210
Maximum permissible mass declared	24,912 lb · 11,300 kg	25,133 lb · 11,400 kg	—
Wheelbase declared	118.3 in · 3,006 mm	110.8 in · 2,814 mm	+7% Magnum 7210
Length declared	208.3 in · 5,290 mm	193.4 in · 4,913 mm	+8% Magnum 7210
Width declared	112.0 in · 2,845 mm	104.5 in · 2,655 mm	+7% Magnum 7210
Height declared	117.4 in · 2,982 mm	114.1 in · 2,898 mm	—
Ground clearance declared	15.9 in · 404 mm	18.2 in · 462 mm	+14% 8730
Turning radius, braked declared	15.6 ft · 4.75 m	—	—
Fuel tank declared	380.4 qt · 360.0 L	400.5 qt · 379.0 L	+5% 8730

Source

Source