Case-IH JX 95 (A) vs Deutz-Fahr DX 6.05

13 material differences

Tractor one

2002–2004

No measured PTO figure

Tractor two

1987–1991

No measured PTO figure

Which should you choose?

Read our verdict on the JX 95 (A) and the DX 6.05 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 5 fields identical or within 5%, which is not counted as material

Case-IH JX 95 (A) and Deutz-Fahr DX 6.05, field by field
Field	JX 95 (A)	DX 6.05	Gap
Engine
Engine power, claimed claimed	94.7 hp	97 hp	—
Engine declared	IVECO 8045.25 L (EURO II)	KHD F6L 912	differs
Displacement declared	3.91 L	5.65 L	+45% DX 6.05
Maximum torque declared	219 lb·ft · 297 N·m	266 lb·ft · 360 N·m	+21% DX 6.05
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Dry LuK double clutch	Independent dry double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	Open centre	—
Pump flow declared	11.9 gpm · 45.2 L/min	12.9 gpm · 48.8 L/min	+8% DX 6.05
Pressure declared	3,553 psi · 245 bar	3,481 psi · 240 bar	—
Three-point lift at ends declared	7,859 lb · 3,565 kg	11,464 lb · 5,200 kg	+46% DX 6.05
Rear PTO speeds declared	540E/540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	6,790 lb · 3,080 kg	9,987 lb · 4,530 kg	+47% DX 6.05
Maximum permissible mass declared	—	14,991 lb · 6,800 kg	—
Wheelbase declared	93.9 in · 2,385 mm	105.0 in · 2,667 mm	+12% DX 6.05
Length declared	149.5 in · 3,798 mm	175.7 in · 4,464 mm	+18% DX 6.05
Width declared	80.9 in · 2,055 mm	87.0 in · 2,210 mm	+8% DX 6.05
Height declared	105.7 in · 2,685 mm	106.7 in · 2,710 mm	—
Ground clearance declared	15.2 in · 385 mm	17.9 in · 455 mm	+18% DX 6.05
Turning radius, braked declared	—	16.0 ft · 4.87 m	—
Fuel tank declared	95.1 qt · 90.0 L	137.4 qt · 130 L	+44% DX 6.05

Source

Source