Case-IH JX 1060 C vs ZETOR 8641

12 material differences

Tractor one

2003–2008

No measured PTO figure

Tractor two

1999–2002

No measured PTO figure

Which should you choose?

Read our verdict on the JX 1060 C and the 8641 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 2 fields identical or within 5%, which is not counted as material

Case-IH JX 1060 C and ZETOR 8641, field by field
Field	JX 1060 C	8641	Gap
Engine
Engine power, claimed claimed	54.3 hp	79.9 hp	+47% 8641
Engine declared	IVECO 8035.05 C (EURO II)	ZETOR Z-1203	differs
Displacement declared	2.93 L	4.16 L	+42% 8641
Maximum torque declared	147 lb·ft · 199 N·m	230 lb·ft · 312 N·m	+57% 8641
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	—	Pedal-operated dry Zetor single-disc clutch	—
Hydraulics & hitch
Pump flow declared	13.8 gpm · 52.1 L/min	15.1 gpm · 57.0 L/min	+9% 8641
Pressure declared	—	1,813 psi · 125 bar	—
Three-point lift at ends declared	—	12,456 lb · 5,650 kg	—
Rear PTO speeds declared	540E/540/1000E/1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	6,978 lb · 3,165 kg	9,678 lb · 4,390 kg	+39% 8641
Maximum permissible mass declared	10,582 lb · 4,800 kg	14,771 lb · 6,700 kg	+40% 8641
Wheelbase declared	83.9 in · 2,130 mm	94.0 in · 2,388 mm	+12% 8641
Length declared	144.2 in · 3,662 mm	189.6 in · 4,815 mm	+31% 8641
Width declared	73.5 in · 1,867 mm	80.7 in · 2,050 mm	+10% 8641
Height declared	94.9 in · 2,410 mm	106.9 in · 2,715 mm	+13% 8641
Ground clearance declared	13.9 in · 353 mm	13.4 in · 340 mm	—
Fuel tank declared	74.0 qt · 70.0 L	190.2 qt · 180.0 L	+157% 8641

Source

Source