Case-IH JX 1060 C vs Fiat 60-56 LM (DT)

8 material differences · fewer than 12

Tractor one

2003–2008

No measured PTO figure

Tractor two

from 1988

No measured PTO figure

Which should you choose?

Read our verdict on the JX 1060 C and the 60-56 LM (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 5 fields identical or within 5%, which is not counted as material

Case-IH JX 1060 C and Fiat 60-56 LM (DT), field by field
Field	JX 1060 C	60-56 LM (DT)	Gap
Engine
Engine power, claimed claimed	54.3 hp	59.3 hp	+9% 60-56 LM (DT)
Engine declared	IVECO 8035.05 C (EURO II)	Fiat 8035.05.206 or 307	differs
Displacement declared	2.93 L	2.93 L	—
Maximum torque declared	147 lb·ft · 199 N·m	136 lb·ft · 185 N·m	+8% JX 1060 C
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	—	Dry LuK or VALEO double clutch, pedal-operated driving clutch	—
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	13.8 gpm · 52.1 L/min	8.7 gpm · 32.8 L/min	+59% JX 1060 C
Pressure declared	—	3,046 psi · 210 bar	—
Three-point lift at ends declared	—	3,847 lb · 1,745 kg	—
Rear PTO speeds declared	540E/540/1000E/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	6,978 lb · 3,165 kg	4,828 lb · 2,190 kg	+45% JX 1060 C
Maximum permissible mass declared	10,582 lb · 4,800 kg	—	—
Wheelbase declared	83.9 in · 2,130 mm	80.8 in · 2,052 mm	—
Length declared	144.2 in · 3,662 mm	137.0 in · 3,480 mm	—
Width declared	73.5 in · 1,867 mm	73.6 in · 1,870 mm	—
Height declared	94.9 in · 2,410 mm	94.5 in · 2,400 mm	—
Ground clearance declared	13.9 in · 353 mm	18.9 in · 480 mm	+36% 60-56 LM (DT)
Turning radius, braked declared	—	10.7 ft · 3.25 m	—
Fuel tank declared	74.0 qt · 70.0 L	63.4 qt · 60.0 L	+17% JX 1060 C

Source

Source