Case-IH CX 90 vs Deutz-Fahr DX 6.05

15 material differences

Tractor one

1998–2000

No measured PTO figure

Tractor two

1987–1991

No measured PTO figure

Which should you choose?

Read our verdict on the CX 90 and the DX 6.05 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

15 material differences · 3 fields identical or within 5%, which is not counted as material

Case-IH CX 90 and Deutz-Fahr DX 6.05, field by field
Field	CX 90	DX 6.05	Gap
Engine
Engine power, claimed claimed	88.8 hp	97 hp	+9% DX 6.05
Engine declared	PERKINS-FASTRAM 1004-40 Turbo-HR	KHD F6L 912	differs
Displacement declared	3.99 L	5.65 L	+42% DX 6.05
Maximum torque declared	235 lb·ft · 319 N·m	266 lb·ft · 360 N·m	+13% DX 6.05
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Pedal-operated, dry single-plate clutch	Independent dry double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	17.0 gpm · 64.3 L/min	12.9 gpm · 48.8 L/min	+32% CX 90
Pressure declared	2,698 psi · 186 bar	3,481 psi · 240 bar	+29% DX 6.05
Three-point lift at ends declared	6,552 lb · 2,972 kg	11,464 lb · 5,200 kg	+75% DX 6.05
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	8,168 lb · 3,705 kg	9,987 lb · 4,530 kg	+22% DX 6.05
Maximum permissible mass declared	13,228 lb · 6,000 kg	14,991 lb · 6,800 kg	+13% DX 6.05
Wheelbase declared	92.8 in · 2,356 mm	105.0 in · 2,667 mm	+13% DX 6.05
Length declared	156.7 in · 3,980 mm	175.7 in · 4,464 mm	+12% DX 6.05
Width declared	84.6 in · 2,150 mm	87.0 in · 2,210 mm	—
Height declared	99.2 in · 2,520 mm	106.7 in · 2,710 mm	+8% DX 6.05
Ground clearance declared	13.0 in · 330 mm	17.9 in · 455 mm	+38% DX 6.05
Turning radius, braked declared	14.7 ft · 4.48 m	16.0 ft · 4.87 m	+9% DX 6.05
Fuel tank declared	163.8 qt · 155.0 L	137.4 qt · 130 L	+19% CX 90

Source

Source