Case-IH CX 80 vs DEUTZ-ALLIS 6080

9 material differences · fewer than 12

Tractor one

1998–2000

No measured PTO figure

Tractor two

1985–1988

No measured PTO figure

Which should you choose?

Read our verdict on the CX 80 and the 6080 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 5 fields identical or within 5%, which is not counted as material

Case-IH CX 80 and DEUTZ-ALLIS 6080, field by field
Field	CX 80	6080	Gap
Engine
Engine power, claimed claimed	82.9 hp	82.9 hp	—
Engine declared	PERKINS-FASTRAM 1004-40 Turbo-HR	ALLIS-CHALMERS 433 TI	differs
Displacement declared	3.99 L	3.29 L	+21% CX 80
Maximum torque declared	225 lb·ft · 305 N·m	—	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Pedal-operated dry single-disc clutch	—	—
Hydraulics & hitch
Pump flow declared	16.1 gpm · 60.8 L/min	19.0 gpm · 71.9 L/min	+18% 6080
Pressure declared	2,698 psi · 186 bar	—	—
Three-point lift at ends declared	8,543 lb · 3,875 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	8,664 lb · 3,930 kg	6,100 lb · 2,767 kg	+42% CX 80
Maximum permissible mass declared	13,228 lb · 6,000 kg	—	—
Wheelbase declared	92.8 in · 2,356 mm	96.0 in · 2,438 mm	—
Length declared	156.7 in · 3,980 mm	149.8 in · 3,805 mm	—
Width declared	82.7 in · 2,100 mm	73.1 in · 1,857 mm	+13% CX 80
Height declared	99.2 in · 2,520 mm	103.2 in · 2,621 mm	—
Ground clearance declared	13.0 in · 330 mm	21.1 in · 536 mm	+62% 6080
Turning radius, braked declared	14.7 ft · 4.48 m	11.9 ft · 3.63 m	+23% CX 80
Fuel tank declared	163.8 qt · 155.0 L	127.9 qt · 121.0 L	+28% CX 80

Source

Source