Case-IH CX 80 vs Case-Steyr M 9083 a

9 material differences · fewer than 12

Tractor one

1998–2000

No measured PTO figure

Tractor two

1994–1995

No measured PTO figure

Which should you choose?

Read our verdict on the CX 80 and the M 9083 a → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 9 fields identical or within 5%, which is not counted as material

Case-IH CX 80 and Case-Steyr M 9083 a, field by field
Field	CX 80	M 9083 a	Gap
Engine
Engine power, claimed claimed	82.9 hp	81.9 hp	—
Engine declared	PERKINS-FASTRAM 1004-40 Turbo-HR	Steyr-MWM WD 401.89	differs
Displacement declared	3.99 L	4.16 L	—
Maximum torque declared	225 lb·ft · 305 N·m	229 lb·ft · 311 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Pedal-operated dry single-disc clutch	—	—
Hydraulics & hitch
Pump flow declared	16.1 gpm · 60.8 L/min	12.7 gpm · 48.1 L/min	+26% CX 80
Pressure declared	2,698 psi · 186 bar	3,481 psi · 240 bar	+29% M 9083 a
Three-point lift at ends declared	8,543 lb · 3,875 kg	9,480 lb · 4,300 kg	+11% M 9083 a
Rear PTO speeds declared	540/1000 rpm	430/540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	8,664 lb · 3,930 kg	8,510 lb · 3,860 kg	—
Maximum permissible mass declared	13,228 lb · 6,000 kg	14,330 lb · 6,500 kg	+8% M 9083 a
Wheelbase declared	92.8 in · 2,356 mm	97.5 in · 2,477 mm	—
Length declared	156.7 in · 3,980 mm	164.0 in · 4,165 mm	—
Width declared	82.7 in · 2,100 mm	85.4 in · 2,170 mm	—
Height declared	99.2 in · 2,520 mm	100.4 in · 2,550 mm	—
Ground clearance declared	13.0 in · 330 mm	16.1 in · 410 mm	+24% M 9083 a
Turning radius, braked declared	14.7 ft · 4.48 m	11.3 ft · 3.45 m	+30% CX 80
Fuel tank declared	163.8 qt · 155.0 L	105.7 qt · 100.0 L	+55% CX 80

Source

Source