Case-IH CS-48 (A) vs Massey Ferguson MF 362/II

10 material differences · fewer than 12

Tractor one

1996–2001

No measured PTO figure

Tractor two

1992–1997

No measured PTO figure

Which should you choose?

Read our verdict on the CS-48 (A) and the MF 362/II → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 4 fields identical or within 5%, which is not counted as material

Case-IH CS-48 (A) and Massey Ferguson MF 362/II, field by field
Field	CS-48 (A)	MF 362/II	Gap
Engine
Engine power, claimed claimed	47.3 hp	61.2 hp	+29% MF 362/II
Engine declared	PERKINS 903-27	Perkins A 4.236	differs
Displacement declared	2.70 L	3.87 L	+43% MF 362/II
Maximum torque declared	155 lb·ft · 210 N·m	168 lb·ft · 228 N·m	+9% MF 362/II
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Dry Carraro double clutch	—	—
Hydraulics & hitch
Pump flow declared	8.1 gpm · 30.8 L/min	9.5 gpm · 36.0 L/min	+17% MF 362/II
Pressure declared	3,481 psi · 240 bar	—	—
Three-point lift at ends declared	4,894 lb · 2,220 kg	6,373 lb · 2,891 kg	+30% MF 362/II
Rear PTO speeds declared	540/1000 rpm	540/540E rpm	differs
Weight & dimensions
Unladen weight declared	5,203 lb · 2,360 kg	6,063 lb · 2,750 kg	+17% MF 362/II
Maximum permissible mass declared	9,259 lb · 4,200 kg	—	—
Wheelbase declared	83.3 in · 2,117 mm	85.8 in · 2,180 mm	—
Length declared	139.0 in · 3,530 mm	153.9 in · 3,910 mm	+11% MF 362/II
Width declared	74.4 in · 1,890 mm	79.9 in · 2,030 mm	+7% MF 362/II
Height declared	91.7 in · 2,330 mm	97.6 in · 2,480 mm	+6% MF 362/II
Ground clearance declared	16.1 in · 410 mm	15.7 in · 400 mm	—
Fuel tank declared	77.1 qt · 73.0 L	79.3 qt · 75.0 L	—

Source

Source