Case-IH CS-48 (A) vs Massey Ferguson MF 360 (A)

12 material differences

Tractor one

1996–2001

No measured PTO figure

Tractor two

1987–1994

No measured PTO figure

Which should you choose?

Read our verdict on the CS-48 (A) and the MF 360 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 2 fields identical or within 5%, which is not counted as material

Case-IH CS-48 (A) and Massey Ferguson MF 360 (A), field by field
Field	CS-48 (A)	MF 360 (A)	Gap
Engine
Engine power, claimed claimed	47.3 hp	57.3 hp	+21% MF 360 (A)
Engine declared	PERKINS 903-27	Perkins AT 3.152-4	differs
Displacement declared	2.70 L	2.50 L	+8% CS-48 (A)
Maximum torque declared	155 lb·ft · 210 N·m	134 lb·ft · 182 N·m	+15% CS-48 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Dry Carraro double clutch	—	—
Hydraulics & hitch
Pump flow declared	8.1 gpm · 30.8 L/min	5.0 gpm · 18.9 L/min	+63% CS-48 (A)
Pressure declared	3,481 psi · 240 bar	—	—
Three-point lift at ends declared	4,894 lb · 2,220 kg	4,255 lb · 1,930 kg	+15% CS-48 (A)
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	5,203 lb · 2,360 kg	5,124 lb · 2,324 kg	—
Maximum permissible mass declared	9,259 lb · 4,200 kg	—	—
Wheelbase declared	83.3 in · 2,117 mm	76.1 in · 1,933 mm	+10% CS-48 (A)
Length declared	139.0 in · 3,530 mm	129.1 in · 3,280 mm	+8% CS-48 (A)
Width declared	74.4 in · 1,890 mm	69.3 in · 1,760 mm	+7% CS-48 (A)
Height declared	91.7 in · 2,330 mm	92.9 in · 2,360 mm	—
Ground clearance declared	16.1 in · 410 mm	8.9 in · 227 mm	+81% CS-48 (A)
Fuel tank declared	77.1 qt · 73.0 L	71.9 qt · 68 L	+7% CS-48 (A)

Source

Source