Case-IH CS-48 (A) vs Hürlimann H-356 (A)

6 material differences · fewer than 12

Tractor one

1996–2001

No measured PTO figure

Tractor two

1983–1986

No measured PTO figure

Which should you choose?

Read our verdict on the CS-48 (A) and the H-356 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

6 material differences · 8 fields identical or within 5%, which is not counted as material

Case-IH CS-48 (A) and Hürlimann H-356 (A), field by field
Field	CS-48 (A)	H-356 (A)	Gap
Engine
Engine power, claimed claimed	47.3 hp	54.2 hp	+14% H-356 (A)
Engine declared	PERKINS 903-27	Hürlimann H-916.3 W	differs
Displacement declared	2.70 L	2.75 L	—
Maximum torque declared	155 lb·ft · 210 N·m	136 lb·ft · 185 N·m	+14% CS-48 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Dry Carraro double clutch	Pedal-operated dry SLH single-disc clutch as driving clutch	differs
Hydraulics & hitch
Pump flow declared	8.1 gpm · 30.8 L/min	8.3 gpm · 31.6 L/min	—
Pressure declared	3,481 psi · 240 bar	—	—
Three-point lift at ends declared	4,894 lb · 2,220 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	5,203 lb · 2,360 kg	5,423 lb · 2,460 kg	—
Maximum permissible mass declared	9,259 lb · 4,200 kg	—	—
Wheelbase declared	83.3 in · 2,117 mm	86.6 in · 2,200 mm	—
Length declared	139.0 in · 3,530 mm	149.6 in · 3,800 mm	+8% H-356 (A)
Width declared	74.4 in · 1,890 mm	73.6 in · 1,870 mm	—
Height declared	91.7 in · 2,330 mm	96.1 in · 2,440 mm	—
Ground clearance declared	16.1 in · 410 mm	14.8 in · 375 mm	+9% CS-48 (A)
Fuel tank declared	77.1 qt · 73.0 L	74.0 qt · 70.0 L	—

Source

Source