Case-IH CS 130 vs John Deere 6620

10 material differences · fewer than 12

Tractor one

1997–2003

No measured PTO figure

Tractor two

2002–2007

No measured PTO figure

Which should you choose?

Read our verdict on the CS 130 and the 6620 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 6 fields identical or within 5%, which is not counted as material

Case-IH CS 130 and John Deere 6620, field by field
Field	CS 130	6620	Gap
Engine
Engine power, claimed claimed	123.2 hp	123 hp	—
Engine declared	SISU 620.92	John Deere PowrTech 6.068 HLA-070/V2-DE or 6.068 HL-471/HP	differs
Displacement declared	6.60 L	6.79 L	—
Maximum torque declared	345 lb·ft · 468 N·m	353 lb·ft · 479.0 N·m	—
Transmission
Top speed declared	24.9 mph · 40 km/h	24.9–31.1 mph · 40–50 km/h	differs
Clutch declared	integrated wet CASE-IH multi-plate clutch in transmission, designed as driving clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	—	Closed centre	—
Hydraulic control declared	—	Load sensing	—
Pump flow declared	32.7 gpm · 123.8 L/min	—	—
Pressure declared	3,408 psi · 235 bar	3,017–3,220 psi · 208–222 bar	differs
Three-point lift at ends declared	19,467 lb · 8,830 kg	16,755 lb · 7,600 kg	+16% CS 130
Rear PTO speeds declared	540/540E/1000E/1000 rpm	540E/540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	13,680 lb · 6,205 kg	13,040 lb · 5,915 kg	—
Maximum permissible mass declared	19,842 lb · 9,000 kg	20,944 lb · 9,500 kg	+6% 6620
Wheelbase declared	110.5 in · 2,806 mm	104.3 in · 2,650 mm	+6% CS 130
Length declared	214.0 in · 5,435 mm	185.2 in · 4,705 mm	+16% CS 130
Width declared	99.2 in · 2,520 mm	96.3 in · 2,445 mm	—
Height declared	115.0 in · 2,920 mm	113.2 in · 2,875 mm	—
Ground clearance declared	21.3 in · 540 mm	18.1 in · 460 mm	+17% CS 130
Fuel tank declared	232.5–317.0 qt · 220.0–300.0 L	218.7 qt · 207.0 L	differs

Source

Source