Case-IH 7250 PRO/8950 vs John Deere 8310 T
14 material differences
Which should you choose?
We will not advise between these two machines, because their unladen weight differs by more than 25% (42%); the drive differs (4WD; Tracks); they were not built in overlapping years (1997–1999; 2000–2002); the 8310 T is on tracks, not an alternative to an ordinary tractor. The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
14 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 7250 PRO/8950 | 8310 T | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 257 hp | 232 hp | +11% 7250 PRO/8950 |
| Engine declared | CUMMINS 6 TA-830 | John Deere-PowerTech 6.081 HRW-16 | differs |
| Displacement declared | 8.27 L | 8.13 L | — |
| Maximum torque declared | 771 lb·ft · 1,046 N·m | 729 lb·ft · 988 N·m | +6% 7250 PRO/8950 |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | Oil-immersed multi-plate clutch | Pedal-operated, hydraulic wet John Deere multi-disc clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Closed centre | — |
| Hydraulic control declared | — | Load sensing | — |
| Pump flow declared | 29.7 gpm · 112.4 L/min | 31.4 gpm · 118.9 L/min | +6% 8310 T |
| Pressure declared | 2,451 psi · 169 bar | 3,379 psi · 233 bar | +38% 8310 T |
| Three-point lift at ends declared | 16,204 lb · 7,350 kg | 12,747 lb · 5,782 kg | +27% 7250 PRO/8950 |
| Rear PTO speeds declared | 1000 rpm | 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 18,338 lb · 8,318 kg | 25,970 lb · 11,780 kg | +42% 8310 T |
| Maximum permissible mass declared | 25,519 lb · 11,575 kg | 31,500 lb · 14,288 kg | +23% 8310 T |
| Wheelbase declared | 118.3 in · 3,006 mm | 89.0 in · 2,260 mm | +33% 7250 PRO/8950 |
| Length declared | 200.4 in · 5,090 mm | 216.0 in · 5,487 mm | +8% 8310 T |
| Width declared | 120.0 in · 3,048 mm | 134.0 in · 3,404 mm | +12% 8310 T |
| Height declared | 121.1 in · 3,077 mm | 123.4 in · 3,135 mm | — |
| Ground clearance declared | 19.3 in · 489 mm | 14.2 in · 360 mm | +36% 7250 PRO/8950 |
| Fuel tank declared | 379.4–470.2 qt · 359.0–445.0 L | 519.9 qt · 492.0 L | differs |
Case-IH 7250 PRO/8950 sources
Source
- Source: Traktorenlexikon, “Case-IH 7250 PRO/8950”
- Source: Traktorenlexikon, “Case-IH 7230 PRO/8930”
John Deere 8310 T sources
Source
- Source: Traktorenlexikon, “John Deere 8310T”
- Source: OECD test report 1935, 2000