Case-IH 7230 PRO/8930 vs Massey Ferguson MF 8160 A

12 material differences

Tractor one

1997–1999

No measured PTO figure

Tractor two

1995–1999

No measured PTO figure

Which should you choose?

Read our verdict on the 7230 PRO/8930 and the MF 8160 A → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 4 fields identical or within 5%, which is not counted as material

Case-IH 7230 PRO/8930 and Massey Ferguson MF 8160 A, field by field
Field	7230 PRO/8930	MF 8160 A	Gap
Engine
Engine power, claimed claimed	211.1 hp	197.4 hp	+7% 7230 PRO/8930
Engine declared	CUMMINS 6 TA-830	VALMET 634 DS	differs
Displacement declared	8.27 L	7.37 L	+12% 7230 PRO/8930
Maximum torque declared	614 lb·ft · 833 N·m	586 lb·ft · 795 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	—	Pedal-operated dry VALEO double clutch	—
Hydraulics & hitch
Pump flow declared	29.7 gpm · 112.4 L/min	14.1 gpm · 53.3 L/min	+111% 7230 PRO/8930
Pressure declared	2,451 psi · 169 bar	2,901 psi · 200 bar	+18% MF 8160 A
Three-point lift at ends declared	13,530 lb · 6,137 kg	12,434 lb · 5,640 kg	+9% 7230 PRO/8930
Rear PTO speeds declared	540/1000 rpm	540/540E/1000 rpm	differs
Weight & dimensions
Unladen weight declared	17,864 lb · 8,103 kg	14,815 lb · 6,720 kg	+21% 7230 PRO/8930
Maximum permissible mass declared	25,519 lb · 11,575 kg	19,842 lb · 9,000 kg	+29% 7230 PRO/8930
Wheelbase declared	118.3 in · 3,006 mm	115.7 in · 2,940 mm	—
Length declared	200.1 in · 5,083 mm	220.9 in · 5,610 mm	+10% MF 8160 A
Width declared	120.0 in · 3,048 mm	97.6 in · 2,480 mm	+23% 7230 PRO/8930
Height declared	119.2 in · 3,027 mm	119.7 in · 3,040 mm	—
Ground clearance declared	17.3 in · 439 mm	18.2 in · 463 mm	+5% MF 8160 A
Fuel tank declared	379.4–470.2 qt · 359.0–445.0 L	285.3 qt · 270.0 L	differs

Source

Source