10 material differences · fewer than 12
Tractor oneCase-IH 7210 PRO/89101997–1999No measured PTO figureTractor twoWHITE 1701990–1992No measured PTO figure
Which should you choose?
Read our verdict on the 7210 PRO/8910 and the 170 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | 7210 PRO/8910 | 170 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 168 hp | 165.8 hp | — |
| Engine declared | CUMMINS 6 T-830 | CUMMINS CT 6-830 | differs |
| Displacement declared | 8.27 L | 8.28 L | — |
| Maximum torque declared | 453 lb·ft · 614 N·m | — | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | Oil-immersed multi-plate clutch with nine plates | Pedal-operated dry single-disc clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Open centre | — |
| Pump flow declared | 29.8 gpm · 112.8 L/min | — | — |
| Pressure declared | 2,451 psi · 169 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 17,236 lb · 7,818 kg | 13,300 lb · 6,033 kg | +30% 7210 PRO/8910 |
| Maximum permissible mass declared | 25,519 lb · 11,575 kg | — | — |
| Wheelbase declared | 118.3 in · 3,006 mm | 112.0 in · 2,845 mm | +6% 7210 PRO/8910 |
| Length declared | 197.6 in · 5,020 mm | 180.0 in · 4,572 mm | +10% 7210 PRO/8910 |
| Width declared | 112.0–128.0 in · 2,845–3,251 mm | 96.0 in · 2,438 mm | differs |
| Ground clearance declared | 15.9 in · 404 mm | 23.0 in · 584 mm | +45% 170 |
| Turning radius, braked declared | — | 13.0 ft · 3.96 m | — |
| Fuel tank declared | 380.4–470.2 qt · 360.0–445.0 L | 295.9 qt · 280.0 L | differs |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Case-IH 7210 PRO/8910 sources
- Source: Traktorenlexikon, “Case-IH 7210 PRO/8910”
- Source: Traktorenlexikon, “Case-IH 7110”
WHITE 170 sources
- Source: Traktorenlexikon, “White 170”
- Source: Traktorenlexikon, “White 160”