Case-IH 9380 vs Case-IH STX 440

9 material differences · fewer than 12

Tractor one

1995–2000

No measured PTO figure

Tractor two

2000–2002

No measured PTO figure

Which should you choose?

Read our verdict on the 9380 and the STX 440 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 5 fields identical or within 5%, which is not counted as material

Case-IH 9380 and Case-IH STX 440, field by field
Field	9380	STX 440	Gap
Engine
Engine power, claimed claimed	394.5 hp	434.0 hp	+10% STX 440
Engine declared	CUMMINS N-14 400 A	CUMMINS QSX-15	differs
Displacement declared	14.02 L	14.95 L	+7% STX 440
Maximum torque declared	1,352 lb·ft · 1,833 N·m	1,583 lb·ft · 2,146 N·m	+17% STX 440
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	Oil-immersed U.V.C. multi-disc clutch	Multi-disc clutch running in an oil bath	differs
Hydraulics & hitch
Hydraulic centre declared	—	Closed centre	—
Pump flow declared	27.5 gpm · 104.1 L/min	41.0 gpm · 155.2 L/min	+49% STX 440
Pressure declared	2,306 psi · 159 bar	3,002 psi · 207 bar	+30% STX 440
Three-point lift at ends declared	—	24,617 lb · 11,166 kg	—
Rear PTO speeds declared	1000 rpm	1000 rpm	—
Weight & dimensions
Unladen weight declared	31,581 lb · 14,325 kg	39,500 lb · 17,917 kg	+25% STX 440
Maximum permissible mass declared	—	39,683 lb · 18,000 kg	—
Wheelbase declared	144.0 in · 3,658 mm	154.0 in · 3,911 mm	+7% STX 440
Length declared	283.5 in · 7,202 mm	297.6 in · 7,558 mm	—
Width declared	157.9 in · 4,011 mm	153.0 in · 3,886 mm	—
Height declared	142.8 in · 3,627 mm	143.0 in · 3,631 mm	—
Ground clearance declared	14.4 in · 365 mm	—	—
Fuel tank declared	1,079.9 qt · 1,022.0 L	1,200.4 qt · 1,136.0 L	+11% STX 440

Source

Source