Case-IH 9380 or Case-IH STX 440?

Which should you choose?

On performance, every comparable figure that differs favours the Case-IH STX 440: power at the PTO shaft and hydraulic flow.

  • The Case-IH STX 440 suits PTO-driven implements (mowers, balers, pumps) better on this data: 11% (29.8 kW / 40.0 hp) more power at the PTO shaft.
  • The Case-IH STX 440 suits loader and hydraulic implement work better on this data: 49% (51.1 L/min / 13.5 gpm) more hydraulic flow.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Case-IH 9380 and Case-IH STX 440, with the call on each
Question9380STX 440Call
Which puts more power through the PTO shaft?269.0 kW (360.7 hp)Traktorenlexikon, “Case-IH 9380”298.8 kW (400.7 hp)Traktorenlexikon, “Case-IH STX 440”AheadThe Case-IH STX 440 has 11% more power at the PTO (29.8 kW / 40.0 hp) than the Case-IH 9380 (both power at the PTO, claimed).
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 9380 and the STX 440.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 9380 and the STX 440.
Which pumps more oil for implements?104.1 L/min (27.5 gpm)Traktorenlexikon, “Case-IH 9380”155.2 L/min (41.0 gpm)Traktorenlexikon, “Case-IH STX 440”AheadThe Case-IH STX 440 has 49% more hydraulic flow (51.1 L/min / 13.5 gpm) than the Case-IH 9380 (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?7,711 kg (17,000 lb)Traktorenlexikon, “Case-IH 9380”11,166 kg (24,617 lb)Traktorenlexikon, “Case-IH STX 440”Not comparableNot comparable on three-point lift: the 9380: lift through the full range 610 mm behind the ends, as stated by the source (Traktorenlexikon, “Case-IH 9380”); the STX 440: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Case-IH STX 440”) — not the same quantity, basis and condition.
Which is heavier, for traction?14,325 kg (31,581 lb)Traktorenlexikon, “Case-IH 9380”17,917 kg (39,500 lb)Traktorenlexikon, “Case-IH STX 440”Ahead (a fact, not an advantage)The Case-IH STX 440 is 25% heavier (3,592 kg / 7,919 lb) than the Case-IH 9380 (both unladen weight, as stated by the source).
Which may carry more ballast and load?18,000 kg (39,683 lb)Traktorenlexikon, “Case-IH STX 440”No figureNo call on maximum permissible mass: no figure on record for the 9380.
Which has the wider choice of gears?12 to 24Traktorenlexikon, “Case-IH 9380”17Traktorenlexikon, “Case-IH STX 440”Sources disagreeNo call on forward gears: sources disagree on the figure for the STX 440.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 9380 and the STX 440.
Which is faster on the road?30 km/h (18.6 mph)Traktorenlexikon, “Case-IH 9380”30 km/h (18.6 mph)Traktorenlexikon, “Case-IH STX 440”EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
Which offers more PTO speeds?1000 rpmTraktorenlexikon, “Case-IH 9380”1000 rpmTraktorenlexikon, “Case-IH STX 440”Sources disagreeNo call on PTO speeds: sources disagree on the PTO speeds of the STX 440.
Which PTO runs independently of the ground drive?No figureNo call on PTO independence: not stated for the 9380 and the STX 440.
Which drives on both axles?4WDTraktorenlexikon, “Case-IH 9380”4WD / 4WD, equal wheelsTraktorenlexikon, “Case-IH STX 440”; OECD test report 1957, 2001EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1995–20002000–2002Ahead (a fact, not an advantage)The Case-IH STX 440 is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Case-IH STX 440 has 11% more power at the PTO (29.8 kW / 40.0 hp) than the Case-IH 9380 (both power at the PTO, claimed).
  • The Case-IH STX 440 has 49% more hydraulic flow (51.1 L/min / 13.5 gpm) than the Case-IH 9380 (both pump flow, as stated by the source).
  • The Case-IH STX 440 is 25% heavier (3,592 kg / 7,919 lb) than the Case-IH 9380 (both unladen weight, as stated by the source).
  • The Case-IH STX 440 is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on three-point lift: the 9380: lift through the full range 610 mm behind the ends, as stated by the source (Traktorenlexikon, “Case-IH 9380”); the STX 440: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Case-IH STX 440”) — not the same quantity, basis and condition.
  • No call on forward gears: sources disagree on the figure for the STX 440.
  • No call on PTO speeds: sources disagree on the PTO speeds of the STX 440.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources