Case-IH 9280 vs New Holland TJ-375

13 material differences

Tractor one

1990–1995

No measured PTO figure

Tractor two

2001–2005

No measured PTO figure

Which should you choose?

Read our verdict on the 9280 and the TJ-375 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 4 fields identical or within 5%, which is not counted as material

Case-IH 9280 and New Holland TJ-375, field by field
Field	9280	TJ-375	Gap
Engine
Engine power, claimed claimed	374.8 hp	369.9 hp	—
Engine declared	CUMMINS NTA-855 A	CUMMINS QSX-15	differs
Displacement declared	10.02 L	14.95 L	+49% TJ-375
Maximum torque declared	1,265 lb·ft · 1,715 N·m	1,325 lb·ft · 1,797 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	21.7 mph · 35 km/h	+17% TJ-375
Clutch declared	Oil-immersed multi-plate driving clutch with disc diameter 228.6 mm	Pedal operated electrohydraulic wet Fuji-Univance multi-disc clutch	differs
Hydraulics & hitch
Pump flow declared	30.3 gpm · 114.7 L/min	40.9 gpm · 154.8 L/min	+35% TJ-375
Pressure declared	2,306 psi · 159 bar	2,596–2,698 psi · 179–186 bar	differs
Three-point lift at ends declared	24,011 lb · 10,891 kg	19,632 lb · 8,905 kg	+22% 9280
Rear PTO speeds declared	1000 rpm	1000 rpm	—
Weight & dimensions
Unladen weight declared	34,674 lb · 15,728 kg	37,620 lb · 17,064 kg	+8% TJ-375
Maximum permissible mass declared	—	39,683 lb · 18,000 kg	—
Wheelbase declared	76.5–132.6 in · 1,943–3,368 mm	154.0 in · 3,911 mm	differs
Length declared	299.6 in · 7,610 mm	297.6 in · 7,558 mm	—
Width declared	153.1 in · 3,890 mm	145.0 in · 3,683 mm	+6% 9280
Height declared	152.4 in · 3,870 mm	143.0 in · 3,631 mm	+7% 9280
Ground clearance declared	16.7 in · 424 mm	13.1 in · 334 mm	+27% 9280
Fuel tank declared	1,001.7 qt · 948.0 L	1,200.4 qt · 1,136.0 L	+20% TJ-375

Source

Source