3 material differences · fewer than 12
Tractor oneCase-IH 91101987–1990No measured PTO figureTractor twoCase-IH 91301987–1990No measured PTO figure
Which should you choose?
Read our verdict on the 9110 and the 9130 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
3 material differences · 13 fields identical or within 5%, which is not counted as material
| Field | 9110 | 9130 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 197.3 hp | 217.0 hp | +10% 9130 |
| Engine declared | CUMMINS 6 CT-8.3 | CUMMINS 6 CTA-8.3 | differs |
| Displacement declared | 8.27 L | 8.27 L | — |
| Maximum torque declared | 555 lb·ft · 752 N·m | 646 lb·ft · 876 N·m | +16% 9130 |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | F.T.K. multi-plate clutch running in oil bath with disc diameter | Oil immersed multi-plate driving clutch with disc diameter | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 28.3 gpm · 107.1 L/min | 28.3 gpm · 107.1 L/min | — |
| Pressure declared | 2,306 psi · 159 bar | 2,306 psi · 159 bar | — |
| Rear PTO speeds declared | 1000 rpm | 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 20,150 lb · 9,140 kg | 21,076 lb · 9,560 kg | — |
| Wheelbase declared | 120.4 in · 3,058 mm | 120.4 in · 3,058 mm | — |
| Length declared | 244.5 in · 6,210 mm | 244.5 in · 6,210 mm | — |
| Width declared | 119.7–148.0 in · 3,040–3,760 mm | 119.7–148.0 in · 3,040–3,760 mm | — |
| Height, over the exhaust declared | 129.5 in · 3,290 mm | 129.5 in · 3,290 mm | — |
| Ground clearance declared | 14.5 in · 368 mm | 14.5 in · 368 mm | — |
| Turning radius, braked declared | 19.2 ft · 5.85 m | 19.4 ft · 5.91 m | — |
| Fuel tank declared | 459.7 qt · 435.0 L | 459.7 qt · 435.0 L | — |
Case-IH 9110 sources
Source
- Source: Traktorenlexikon, “Case-IH 9110”
Case-IH 9130 sources
Source
- Source: Traktorenlexikon, “Case-IH 9130”