Case-IH 845 XL (A) vs Massey Ferguson MF 3060 (A)

9 material differences · fewer than 12

Tractor one

1990–1996

No measured PTO figure

Tractor two

1986–1992

No measured PTO figure

Which should you choose?

Read our verdict on the 845 XL (A) and the MF 3060 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 6 fields identical or within 5%, which is not counted as material

Case-IH 845 XL (A) and Massey Ferguson MF 3060 (A), field by field
Field	845 XL (A)	MF 3060 (A)	Gap
Engine
Engine power, claimed claimed	78.9 hp	76.0 hp	—
Engine declared	IH D-268	Perkins A 4.248 LF	differs
Displacement declared	4.39 L	4.07 L	+8% 845 XL (A)
Maximum torque declared	218 lb·ft · 296 N·m	201 lb·ft · 272 N·m	+9% 845 XL (A)
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	—	pedal-operated dry and air-cooled single-disc clutch	—
Hydraulics & hitch
Pump flow declared	8.6 gpm · 32.6 L/min	13.6 gpm · 51.5 L/min	+58% MF 3060 (A)
Pressure declared	—	2,277–2,350 psi · 157–162 bar	—
Three-point lift at ends declared	6,945 lb · 3,150 kg	6,351 lb · 2,881 kg	+9% 845 XL (A)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	8,069 lb · 3,660 kg	7,859 lb · 3,565 kg	—
Maximum permissible mass declared	12,787 lb · 5,800 kg	—	—
Wheelbase declared	94.1 in · 2,390 mm	93.5 in · 2,375 mm	—
Length declared	144.9 in · 3,680 mm	155.9 in · 3,959 mm	+8% MF 3060 (A)
Width declared	80.7 in · 2,050 mm	74.4 in · 1,889 mm	+9% 845 XL (A)
Height declared	105.1 in · 2,670 mm	103.1 in · 2,620 mm	—
Ground clearance declared	19.1 in · 484 mm	22.2 in · 565 mm	+17% MF 3060 (A)
Turning radius, braked declared	12.6 ft · 3.85 m	—	—
Fuel tank declared	112.0 qt · 106.0 L	156.4 qt · 148.0 L	+40% MF 3060 (A)

Source

Source