Case-IH 845 XL (A) vs Landini 8800 (DT)
8 material differences · fewer than 12
Which should you choose?
Read our verdict on the 845 XL (A) and the 8800 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 7 fields identical or within 5%, which is not counted as material
| Field | 845 XL (A) | 8800 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 78.9 hp | 75.9 hp | — |
| Engine declared | IH D-268 | PERKINS LF 4.248 | differs |
| Displacement declared | 4.39 L | 4.07 L | +8% 845 XL (A) |
| Maximum torque declared | 218 lb·ft · 296 N·m | 185 lb·ft · 251 N·m | +18% 845 XL (A) |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | — | Pedal-operated dry single-disc clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 8.6 gpm · 32.6 L/min | 13.6 gpm · 51.5 L/min | +58% 8800 (DT) |
| Three-point lift at ends declared | 6,945 lb · 3,150 kg | 7,397 lb · 3,355 kg | +7% 8800 (DT) |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 8,069 lb · 3,660 kg | 8,422 lb · 3,820 kg | — |
| Maximum permissible mass declared | 12,787 lb · 5,800 kg | — | — |
| Wheelbase declared | 94.1 in · 2,390 mm | 93.3 in · 2,371 mm | — |
| Length declared | 144.9 in · 3,680 mm | 155.9 in · 3,959 mm | +8% 8800 (DT) |
| Width declared | 80.7 in · 2,050 mm | 78.3 in · 1,990 mm | — |
| Height declared | 105.1 in · 2,670 mm | 105.5 in · 2,680 mm | — |
| Ground clearance declared | 19.1 in · 484 mm | 14.1 in · 357 mm | +36% 845 XL (A) |
| Turning radius, braked declared | 12.6 ft · 3.85 m | — | — |
| Fuel tank declared | 112.0 qt · 106.0 L | 156.4 qt · 148.0 L | +40% 8800 (DT) |
Case-IH 845 XL (A) sources
Source
- Source: Traktorenlexikon, “Case-IH 845XL”
Landini 8800 (DT) sources
Source
- Source: Traktorenlexikon, “Landini 8800 DT”