Case-IH 7250 Magnum vs John Deere 8220 T
13 material differences
Which should you choose?
We will not advise between these two machines, because their unladen weight differs by more than 25% (41%); the drive differs (4WD; Tracks); they were not built in overlapping years (1994–1997; 2002–2005); the 8220 T is on tracks, not an alternative to an ordinary tractor. The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
13 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 7250 Magnum | 8220 T | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 245.5 hp | 222.1 hp | +11% 7250 Magnum |
| Engine declared | CUMMINS 6 TA-830 | John Deere-PowerTech 6.081 HRW-21 | differs |
| Displacement declared | 8.27 L | 8.13 L | — |
| Maximum torque declared | 717 lb·ft · 972 N·m | 707 lb·ft · 958 N·m | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | Case-IH multi-plate clutch running in oil bath | Pedal operated hydraulic wet John Deere multi-disc clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic control declared | — | Load sensing | — |
| Pump flow declared | 28.9 gpm · 109.4 L/min | 34.6 gpm · 131.0 L/min | +20% 8220 T |
| Pressure declared | 2,451 psi · 169 bar | 3,379 psi · 233 bar | +38% 8220 T |
| Three-point lift at ends declared | 20,637 lb · 9,361 kg | 15,212 lb · 6,900 kg | +36% 7250 Magnum |
| Rear PTO speeds declared | 1000 rpm | 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 18,140 lb · 8,228 kg | 25,507 lb · 11,570 kg | +41% 8220 T |
| Maximum permissible mass declared | 25,519 lb · 11,575 kg | 31,500 lb · 14,288 kg | +23% 8220 T |
| Wheelbase declared | 118.3 in · 3,006 mm | 89.0 in · 2,260 mm | +33% 7250 Magnum |
| Length declared | 200.4 in · 5,090 mm | 217.7 in · 5,530 mm | +9% 8220 T |
| Width declared | 120.0 in · 3,048 mm | 103.7 in · 2,634 mm | +16% 7250 Magnum |
| Height declared | 121.1 in · 3,077 mm | 122.9 in · 3,122 mm | — |
| Ground clearance declared | 19.3 in · 489 mm | 13.8 in · 350 mm | +40% 7250 Magnum |
| Fuel tank declared | 379.4 qt · 359.0 L | 519.9 qt · 492.0 L | +37% 8220 T |
Case-IH 7250 Magnum sources
Source
- Source: Traktorenlexikon, “Case-IH 7250”
- Source: Traktorenlexikon, “Case-IH 7230 PRO/8930”
John Deere 8220 T sources
Source
- Source: Traktorenlexikon, “John Deere 8220T”
- Source: Traktorenlexikon, “John Deere 8120T”