Case-IH 7240 Magnum vs John Deere 8110 T

14 material differences

Tractor one

1994–1997

No measured PTO figure

Tractor two

2000–2002

No measured PTO figure

Which should you choose?

Read our verdict on the 7240 Magnum and the 8110 T → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

14 material differences · 3 fields identical or within 5%, which is not counted as material

Case-IH 7240 Magnum and John Deere 8110 T, field by field
Field	7240 Magnum	8110 T	Gap
Engine
Engine power, claimed claimed	230.8 hp	192.4 hp	+20% 7240 Magnum
Engine declared	CUMMINS 6 TA-830	John Deere-PowerTech 6.081 HRW	differs
Displacement declared	8.27 L	8.13 L	—
Maximum torque declared	687 lb·ft · 932 N·m	586 lb·ft · 794 N·m	+17% 7240 Magnum
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Case-IH multi-disc clutch running in oil bath	Pedal operated hydraulic wet John Deere multi-plate clutch	differs
Hydraulics & hitch
Hydraulic control declared	—	Load sensing	—
Pump flow declared	29.0 gpm · 109.8 L/min	31.8 gpm · 120.4 L/min	+10% 8110 T
Pressure declared	2,451 psi · 169 bar	3,379 psi · 233 bar	+38% 8110 T
Three-point lift at ends declared	15,759 lb · 7,148 kg	10,971 lb · 4,976 kg	+44% 7240 Magnum
Rear PTO speeds declared	1000 rpm	1000 rpm	—
Weight & dimensions
Unladen weight declared	17,851 lb · 8,097 kg	23,649 lb · 10,727 kg	+32% 8110 T
Maximum permissible mass declared	25,519 lb · 11,575 kg	31,500 lb · 14,288 kg	+23% 8110 T
Wheelbase declared	118.3 in · 3,006 mm	89.0 in · 2,260 mm	+33% 7240 Magnum
Length declared	200.4 in · 5,090 mm	216.0 in · 5,487 mm	+8% 8110 T
Width declared	120.0 in · 3,048 mm	134.0 in · 3,404 mm	+12% 8110 T
Height declared	121.1 in · 3,077 mm	123.4 in · 3,135 mm	—
Ground clearance declared	19.3 in · 489 mm	14.2 in · 360 mm	+36% 7240 Magnum
Fuel tank declared	379.4 qt · 359.0 L	519.9 qt · 492.0 L	+37% 8110 T

Source

Source